20 Most Recent 1993 Mercury Capri - Page 7 Questions & Answers

**NOTE** Only do this repair when the engine is COLD to avoid getting scalded by the coolant.
Most drain plugs are fitted to the lowest possible point on the radiator. Usually one of the two bottom corners. However, not all radiators are fitted with them. In some cases you need to slacken the clamp on the lowest radiator hose and pull it off to drain the coolant.

Mercury Cars &... | Answered 3 days ago

Does not have a flasher , it's controlled electronically by the SJB . This is a body control module (computer) Your best bet , take it to a qualified reair shop .

Principles of Operation
The smart junction box (SJB) monitors the multifunction switch position by sending multiple voltage reference signals to the multifunction switch. When the multifunction switch is in the LH or RH TURN position, or the hazard lamp switch is engaged, that input signal is routed to ground.
When the SJB receives an input from the multifunction or hazard switch indicating a request for a turn signal or hazard lamps, the SJB then supplies voltage to the appropriate turn lamps.

Mercury Cars &... | Answered on Jan 10, 2020


Mercury Cars &... | Answered on Jan 09, 2020

According to my info, you don't have a map sensor. You do have a maf sensor which is part of air intake system.

Mercury Cars &... | Answered on Jan 06, 2020

Have seen the fins on the water pump rust way ..
Fill it up not running . Start it with the cap off the radiator . If it shoots water up .its the head gaskets. If it doesn't pull water pump and check it

Mercury Cars &... | Answered on Jan 05, 2020

Possibly in the trunk, under a trim panel or carpet. Look along the sides of the trunk.

Mercury Cars &... | Answered on Jan 02, 2020

No headlamp's at all work , low or high ? Does the vehicle have HID - high intensity discharge lamps ? Has fuse's relays an a electronic control module (SJB) smart junction box , fords body control module . involved in making the headlamps work . Your best bet , take it to a qualified repair shop.

Mercury Cars &... | Answered on Dec 31, 2019

You need to be more specific. What is or is not happening? Are you blowing fuses and melting wires or is there something that is not working? Is the battery going dead? Check to see if voltage is getting to the inner fuse panel. Do this with a voltage meter. Make sure that all is well in the fuse box. Most cars current pass through the ignition switch. Make sure it is good.

Mercury Cars &... | Answered on Dec 30, 2019

Are you testing it with a pressure gauge on the fuel rail or it just does not start? A possibility is that there is a bad fuel line at the pump its self in the tank. Or the pump is just bad.

Mercury Cars &... | Answered on Dec 30, 2019

Wiring problem 80% chances. Find some online guides..google or there v helpful n u don't need to refer to anythng else.. like reliable -store.com is gud fr this.. do tell me how it goes.. so easy!

Mercury Cars &... | Answered on Dec 27, 2019

Not finding what you are looking for?
1993 Mercury Capri Logo

105 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

gerry bissi

Level 3 Expert

4388 Answers


Level 3 Expert

85222 Answers


Level 3 Expert

5692 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Capri Mercury

  • Capri Mercury

Most Popular Question

fuel pump located 1993 mercury capri

  • Cars & Trucks