20 Most Recent
2002 Chrysler 300M - Page 9 Questions & Answers
My car Isn jerking and actn like its stuck in
You are certainly risking a bigger problem if you don't top up the fluid!
When the torque converter spins, the fluid is compressed and acts like a semi solid, and transferring the power from the engine to the gearbox. No fluid - No power transfer to the gearbox.
Top up your fluid. You will never know if there is a bigger problem until you do.
At the moment you're acting like a man who hasn't eaten for a month who's asking if he's losing weight because he has cancer!
I have a 2002 chrysler
You will have to have the system scanned to find the problem and repair it, other wise the light will keep returning.
2002 Chrysler 300 M...Turn signals
It's located behind the center instrument panel. I also believe that there is a headlamp flash relay there as well so don't get them mixed up. the one you are looking for should have a wiring coming from it. I gave you a picture below of an aftermarket one so you get the idea. I hope that's the problem and not in the wiring itself. I hope this helps and good luck.
I have starting issues,sometimes I have to prime
Hi, if your engine light is not on, there is no use scanning the computer. Schematics are available online at autozone.com. Hard starting is usually a fuel issue. I would check the fuel pressure at the rail and maybe remove the injectors for cleaning. Starting may also be affected by emission systems, such as a stuck EGR or purge valve.
Please see my tip at http://www.fixya.com/cars/r7427423-fix_poor_idle_high_idle_stalling_fuel . These are generic instructions. If you get stuck or need specific instructions for your car, I would be happy to send info from autozone.com for your car.
I have a 2002 300M
take that code to local part store they be more than glad to tell you exactly whats wrong
Our 300M has developed about 3 inches of play in
this is extremely dangerous and needs to be sorted as soon as possible but i cannot tell you what is wrong without having vehicle on a lift so i would advise you take car to a garage and do not drive this vehicle as its big lump of stell and you might be alright but how about a pedestrian----Why isnt this vehicle subject to a yearly mechanical inspection like here in europe ?? I do feel its about time that america caught up with our europeon legistlation regarding the mechanical condition of vehicles over 3 yrs of age .
I set the cam timing
Did you make sure the timing marks were line up correctly? If not double check. The have to be exact. Also use a timing light to check the engine timing and adjust if needed.
Power steering pump on a 2002 chrysler 300m how do
The belts need to be removed and they take a special wrench. If you have to ask how chances are this is best left to the experts. The plastic sensors etc can cost you way more than any potential savings. There are several engine combination's of motors on this car and you don't say which it is you have. Best to leave this one to the experts.
If you insist - then
remove the negative battery cable
- remove the cover on top of the engine
remove the belt [s]
remove the hoses to the power steering pump
remove the bolts and the power steering pump assembly
- reverse this procedure and then 'bleed the lines' to remove any air.
Again I strongly suggest you leave this job to the experts.
Not finding what you are looking for?