20 Most Recent
1993 Suzuki Samurai Questions & Answers
P0170 runs rough
code p0170 refers to fuel trim (FT) bank 1--malfunction===causes--intake leak---AIR system fuel pressure/pump/injectors--EVAP canister purge valve--HO2s
It also refers to heated oxygen sensor (HO2S) 3 bank 1--circuit malfunction===causes --wiring---HO2S--ECM
fix the o2 sensor and the purge valve and you may be on the way to fixing the faults.
My suzuki F6 multicab emits black smoke what is
If not fix after tune up... ask the mechanics for the condition of the piston rings? the smoke might be an oil mix up on the fuel due to piston rings problems... This what had happened to my multicab recenlty...
I have a suzuki samurai
First ck for a vacuum leak listen for a small slight hisssing noise. and ck pcv hose and valve. the normal rpm is 750 to 850 from the front of the vehicle look on the right side of the carburator youll see a screw at the base of carburator turn it in and you lean the vehicle out which you dont want. turn it 1/4 out and see if it idles smooth, if neither reacts than you got a vacuum leak going on
The back door in this jeep is stuck, the lock will
back door hatch or back passenger door?
More than likely the lock has seized and you'll have to take the interior door panel off in order to access the mechanics of the door lock to see what is jammed. Good luck.
My tbi 1.6 samuri lopes
What I recommend is to take you car to a local auto parts store and have them retrieve the codes from your on board computer.This is usually done for free.This will tell you in what system your having your problem at.It will tell you whether its in your ignition or your emissions system.It could be that you might have a bad throttle position sensor or a bad Idle air control valve.The computer codes will give you a better Idea as to where to look.
I am using samurai 2000
do you mean fuel consumption low? if so fit free wheeling hubs this will take less strain on the engine, and improve consumption,
Not finding what you are looking for?