20 Most Recent
2005 Chrysler PT Cruiser - Page 3 Questions & Answers
Car stalls when stopped if AC is on
if the engine stalls when ac is on then there is a problem with the ac pump bearing could be sized, the ac pump has a clutch and this engages when ac is activated, there is usually a small drop in engine idle but should not stall the engine unless the engine idle is to low. should be around 880 rpms idle with the ac on,
How to lock the doors on Chrysler pt Cruiser 05
There is a button on the key fob that has a closed padlock, and you can lock all doors simply by pressing the lock switch on the interior of the drivers door just below the mirror. The drivers door does lock with the key
05 PT cruiser wont start?
If you are getting fire and fuel to the throttle body check the catalytic converter and muffler to ensure they are not plugged up. If one of them is then it puts back pressure on the engine and will not allow the fuel to enter the cylinders and fire and start the truck. You can remove the 02 sensor ahead of the catalytic converter and it should start if this is the problem. The truck will still run rough but start and if so then you have to determine which is plugged up. My guess would be the cat.
Changed the timing belt and
What the P0016 code means. P0016 is the OBD-II generic code indicating that the camshaft position sensor for bank 1 does not correlate to the signal from the crankshaft position sensor. The camshaft timing is out of position due to the timing chain jumped teeth. The camshaft phaser is out of position due to problems with phaser.
Not finding what you are looking for?