20 Most Recent 2005 Isuzu Ascender - Page 4 Questions & Answers

Where is the lower port so you can put in Refrigerant for the Isuzu 2005 Ascender?

First thing you need to check is the fuse, which should be under the hood. And then the bulbs. No... they didn't both burn out at the same time. They burnt out one at a time. You just don't notice iuntil the second one goes.

You'll need to have the computer scanned for codes at a repair shop.

Try turning your wheel or pushing the shifter up past park, some of these shifter lock mechanisms can be touch and does prevent ignition from turning.

is the key worn out looking? after a while the key files itself down to the point that it won't work anymore..or if that isn't it...is the steering wheel locked at the time? if it is, pull it slightly one way or the other and try turning the key...see if that works for you...

2005 impala trans hits hard after a while or driving faster speeds i turn off the engine for a few minutes restart engine and he changes fine

The instruction are in the owner's manual under the section for Home Link programming.

Exactly what fautl code ( Pxxxx ) are you nete there when scanning your PCM (Computer). Send us this code number.

Go to the auto parts store. They sell a special kit to reattach your mirror. It is simple to do. You MUST follow the package instructions.

Thanks for your interest in FixYa.com

You need to go to an Auto Zone or other parts store and have them hook up a code reader to see what codes are stored. That most likely will give you a good idea why you lose power and for sure why the Check Engine light is on.

Then if you still need assistance, get back here with the codes and I can try to help you further. Just cannot do anything without the codes since your Check Engine light is on.

they had a lot speedometer clutster problem, maybe even covered under a warranty, contact the dealer.