20 Most Recent
2005 Dodge Durango - Page 6 Questions & Answers
2005 durango hood will not close, only the safety latch engages
Try spraying some penetrating oil on the latch and use a screwdriver to push the latch down as if the hood was closed. Have someone pull the release on the inside and do it over several times to get the latch to move freely.If this does not work, check for hood alignment problems to see if it is contacting the latch properly.
What is the torque specs. For a 2005 Dodge Durango pinion nut
you may have to get the workshop manual for this as some diff pinions have a collapsible spacer between the bearings and the pinion nut. Adjustment is done to a reading that is obtained by turning the pinion flange . To this end you cannot reuse a spacer as tensioning as required will overload the bearings as the spacer will already be collapsed.
How do I tighten my brakes when I press the brake pedal
The only basic thing most (non-technical) people can do is to check the brake fluid level and replenish that, if you still have problems after a few 'pumps' on the brake, there might be a problem on your brake system. (Which is quite a complex hydraulic system.)
You should first have a qualified person check your brake pads, if they are very worn, more brake fluid is required to fill the cylinders.
When that is fixed, they should check the master cylinder and brake linings for any leaks.
Hope this helps.
CarPartsDiagram
How do I tighten my brake pedal
THIS SOUNDS LIKE A MASTER CYL GOING BAD. IF YOU PUMP THE PEDAL DOES IT GET HIGHER THEN FADE? IF SO HAVE THE BRAKES CHECKED NOW
12/18/2014 11:39:24 PM •
2005 Dodge...
•
Answered
on Dec 18, 2014
P0068 05 dodge durango how do I fix it
the most common for this code is throttle position sensor. follow your throttle cable to th engine and where it ends there will be a plastic piece with a wire conected to it directly across from it.
Mi durango 2005 no ensiende pase corriente y
cambio el altenadoro ,una test ,aranque motor ,con motor en relatine desenganche una terminal de batterie ,motor en marche el problema es el batterie ,el motor parado problema es el altenerador
How do i remove a 2005 dodge durango air bag
HI Nick.
Please do not do this, there is pyrotechnics involved which can be extremely dangerous if triggered while you are working on it.
If you want to disable it for the safety of a child that will ride in that seat, look for the child safety switch to disable the airbag.
Keep in mind that even qualified mechanics are not allowed to work on airbag systems because it is dangerous.
Safety first please!
Where is the evap on a 2005 dodge durango
The purge valve is up on the engine. the vent valve is by the gas tank or at the charcoal filter, the lines run from the tank and filter to the engine. the lines are plastic, except under the body, metal then. Codes would be nice. This would tell me where to look.
Not finding what you are looking for?