Turn just the ignition on without starting the vehicle. Can you hear the fuel pump running? If not you could have a problem with the fuel pump or the fuse.
? 8:10
https://www.youtube.com/watch?v=SRKTLUJGK0A
May 3, 2013 - Uploaded by DUSTINSMOBILE WRENCH
... a New Ford F-350 Truck on a Trailer - Duration: 0:31. by Belt Liner 2,323,434 views. 0:31. 92-2014 Ford F-150 250 350 Expedition won't start ...
? 1:01
https://www.youtube.com/watch?v=ADUc1UHVhkM
Oct 13, 2013 - Uploaded by Tristen Perry
Hello people on YouTube. I have a 86 F350 that won't start up. It has a brand new solenoid in it. The truck ...
fordfzone.com > Technical Support > 80-96 Ford Truck Tech Support
Jan 26, 2007 - 11 posts - 8 authors
Will not re-start, seems to be flooding at this point. ... I have a 1988 Ford F-350 with an EFI 460 engine. ... run a couple of seconds, shut off if you didn't start the truck. they now run all the time when the key is in the on position.
Ok. You have conflicting statements here. You say it won't crank. That is supposed to mean that the engine will not spin when the ignition switch is turned. Cranks but won't start sounds more like what you are getting at from the second statement that spraying gas in cause the engine to "hit" as you say. Am I to understand that you hooked the battery up backwards? If you did I'm very surprised you got that much to work. By your lack of knowledge of standard mechanic terminology, you come across as one who does not normally work on vehicles. I don't know what to tell you, but if you are careless (or ignorant) enough to hook the battery up backwards, the level of work that will be required to repair the electrical damage done by that act is most likely beyond your ability to execute. Take your car to a good mechanic or better yet, and auto electric service center.
depends how long it sat but yes if air gets in to fuel system that could start corrsion , make sure with volt tester that pump is getting power silly to replace pump when it might be a simple fuse or inertia switch to fix it
