20 Most Recent 1984 Ford Crown Victoria Questions & Answers

I have a 1984 Crown Victoria and I'm trying to find the OBD plug in, If you know if it has a plug let me know where it is, thanks!

Question has no proper answer because so many factors affect this--tune up, tire size, rear axle ratio, weather, road condition, milage on car, etc.

if this is a carburetor system the filter is threaded into the carburetor were the fuel line threads into the filter.

Sorry-- but you know more than we doNeed wiring diagrams to figure those issues outMaybe it never was used

Duplicate question.

You will absolutely need the factory repair manuals to get this all back together without a hitch. You can download them for a small fee here. Take your time follow the directions, never force something that seems stuck, if it won't come out you missed a bolt or a screw, expect to spend up to 14 hours doing this job.

Get on your knees & lick it

IAC is on the throttle body, go to any parts shop and ask for a print out location.

IF THE PROBLEM IS NOT THE FUEL PUMP, FUEL RELAY, FUEL PRESSURE, AND OR FUSE WAT ELSE COULD B THE PROBLEM

may need gas filter or pluged ijector try ijector cleaner if to cold frozzen put dry gas in tank if its frozzen may need to heat up gas lines at motor and carb

ENGINE IS NOT GETTIN FUEL UP TO IT