20 Most Recent 1991 Ford LTD Crown Victoria - Page 7 Questions & Answers

0helpful
1answer

Runs till warm, dies when put into drive

Check for vacuum leaks and read other tips at link below. Do It Yourself Diagnosis and Repair
8/1/2017 12:41:08 PM • Ford Crown... • Answered on Aug 01, 2017
0helpful
1answer

Replace oil pressure switch 2002 crown vic

Oil pressure switch is either on top at rear of block or next to the oil filter. Disconnect the wire and use an appropriate tool to remove it, then install the new one.
7/28/2017 3:22:58 AM • Ford Crown... • Answered on Jul 28, 2017
0helpful
1answer

Where is the fuse for the driver seat on a 2004 crown vic police interceptor

No fuse. Circuit breaker 602 in battery junction box
7/1/2017 2:50:38 PM • Ford Crown... • Answered on Jul 01, 2017
0answers
0answers
0helpful
1answer

One headlight brighter than one other on crown Vic

I'm having a problem with my right headlight on my crown 2008 crown vic, whenever it rains my right headlight won't turn off, even when there's no key in the ignition, sometimes it turns on by itself if the car is out in the rain, any help would be much appreciated
3/27/2017 4:38:35 AM • Ford Crown... • Answered on Mar 27, 2017
0helpful
1answer

Temperature guage cooling sensor location 1995 Ford crown vic

Should be to the right and behind the alternator if you are standing in front of the vehicle and looking at the engine if I recall correctly. https://static.cargurus.com/images/site/2013/06/29/17/01/pic-2607526800073566994-1600x1200.jpeg?_ga=1.109447555.706093545.1483662143
2/2/2017 10:34:00 PM • Ford Crown... • Answered on Feb 02, 2017
0helpful
1answer

97 ford crown vic. Power steering seems rather easy and the vehicle is all over the road especially at higher speeds. Can't keep the car staight

I sounds like the power steering gear box (most likely) or an over pressure from he Power steering pump, which would be rare. But you should have both possibilities checked. Have a local tire shop (front ends and steering is there real bread and butter) test drive the car and see what they think, doubt they will charge you..
1/15/2017 10:03:28 PM • Ford Crown... • Answered on Jan 15, 2017
0helpful
1answer

Do you have to disconnect the air bag when replacing the ignition switch in a 95 crown victoria

Yes you do, be very careful or you can severely injure or even kill yourself if the SRS system is not disarmed correctly.
1/10/2017 2:29:54 AM • Ford Crown... • Answered on Jan 10, 2017
0helpful
1answer

No fire throw the plug wire

Bad wire. or coil.
12/21/2016 8:34:50 PM • Ford Crown... • Answered on Dec 21, 2016
0helpful
1answer

How to remove a axle on a crown victoria PI. the axle lock washers will not pass the S shaped spring

You must remove that posi lock spring to get the washer out.
9/21/2016 7:40:01 PM • Ford Crown... • Answered on Sep 21, 2016
Not finding what you are looking for?
1991 Ford LTD Crown Victoria Logo

108 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Crown Victoria Ford

  • Crown Victoria Ford

Most Popular Question

heater blow cold air

  • Cars & Trucks
Loading...