20 Most Recent 2000 Dodge Ram 1500 Truck - Page 8 Questions & Answers

Have you replaced the transmission or steering column/steering gear?

you just need normal tools to get the timing cover off to get to the timing chain but you dont need any special tools to do it

CPM? Isn't that the cam position sensor? That sensor is to let computer know when to pulse the injectors.

Check for shifting lever or cable need to be adjust...

The most common cause is not enough air flow thru the radiator, because of a cooling fan problem.

sounds to me like you have bad ball joints. i had the same thing happen on my truck, that was also a dodge ram 1500

check your fuel filter it may be blocked . If you havent replaced it in a year or so its probably due to be replaced . youll find it under the car if this is helpful please leave good feed back

to remove the axles, remove brake caliper and disc, remove hub assembly, the center hub/axle nut and...(there are i think 3-4 bolts on the back side of the spindle to remove the hub), you may have to force the hub off the spindle with a hammer or air hammer... once the hub is out the axle should slide out of the front differential allowing access to the ball joint nuts for removal...

A little more detail. Do you mean speakers are crackling. Most likely blown the factory speakers. These are very cheaply made. And if you play music loud often they will blow easy. Is it completely stock system. If you relaced your stereo with an after market it may be the wrong ohms for the speakers or to much power and you need better quality speakes. If not coming in clearly make sure your antenna is tight and your wire harness are are connected securely. Let me know more details. Do you have infinity sound or not. Any after market components. Or completely stock.

Hi my name is Allen!

The sensor you are looking for is located in the rear diff housing, its mounts on top of the housing it is also used for ABS if equipped.

For further asistance you may reach me through FixYa!

Either its a bad new battery or tour altenator isn't charging it. Jumpstart it.

P1740 DODGE Torque Converter Clutch or OverdriveYou are having a Transmission Issue. There is a known issue with the TCC Lock-Up Solenoid. Once you Clean and Replace the Solenoid, your problem will go away (95% sure)