20 Most Recent
1988 Chevrolet Caprice Questions & Answers
1988 chevy 305 hesitation or chugging
check the gasket below the carburetor it likes to deteiorate and brake look for any signs of gas they are notorius for leaking and make a truck run like ****. if you cant find your fix maybe a simple tune up is in order?
I am from pakistan and
The brake booster from most of the GM cars of the same size should fit. To change it you need to unbolt the master cylander from the booster be careful not to kink brake lines disconnect vacum hose from booster unbolt booster from fire wall. Now replace in reverse order. Always be careful of the brake lines.
I have a 1989 f150
It's either a t-20 torx screw or a 7/32" bolt head screw.
Google image search "ford ignition module tool" you will see the two most common ones. The one that has the two different tools offset is my personal favorite. Either one will work and either will likely be available at any good auto parts store. I’m happy to assist further over the phone at
https://www.6ya.com/expert/jeremy_d728a59f986299fa
Very high idle on
There are a few things to check there. First, make sure the choke is working. Next, adjust the small screw below the choke assembly on the end of the primary throttle shaft (right side). Also make sure that the choke pull off vacuum mechanism is working to partially open the top choke plate after the engine starts. Also make sure that all vacuum lines are connected and not cracked or broken.
I have a 88 chevy
you need to replace the breaks master disk or the master disk sealing ket
Not finding what you are looking for?