20 Most Recent 2004 Chevrolet Express - Page 2 Questions & Answers

replace discpad or breakshoe

replace the discpad or breakshoe

80% of the belt will go around the crank pull. that makes it easy then 80%

Front or rear?

Just go onto google and type in how do I change a brake light on a Chevy express van you will be shown a video of how to do it hope this helps

There should be a diagram on the underside of your hood. Should also be one in your owners manual. Autozone can pull one up easy too.

Hi Gary, The code is indicating a malfunction of the injector circuit, meaning it could be a crank or cam shaft pick up sensor malfunction, a knock sensor, or the ECU, cables or injector. Get me some additional info in relation to performance and other symptoms and we'll see what we can discover. Regards John

remove the belt unbolt the tensioner and replace. the center of the tensioner has a half inch socket in it . put your pull handle in that socket like you would a normal socket wrench and rotate to relieve pressure on belt remove belt unbolt tensioner

find a nice independent mechanic and if he's good stick with him-they generally care more than a dealership which will charge you out the tailpipe and do bad work-cheers Denny

if its a service model van the panels are riveted on and will need to be drilled for repair, if its a passenger van the panels are retained and screwed in place, more than likely the handle has jumped the cam dowel or has lostr the rod retaining clip

It is tied in with the wipers most likely.You may just have a bad connection at the pump wires.