20 Most Recent 1993 GMC Sierra K1500 - Page 5 Questions & Answers

0helpful
1answer
0helpful
1answer

Tapping sound under glove box when starting or shutting off engine

This just shows you have a chevy truck). There is a worn or broken gear on the recirculate door under the dash. Easiest thing is just to disconnect it to stop the racket. If you have really small hands and break your arm in 2 places you might be able to repair it.
12/28/2012 1:42:06 AM • 1993 GMC Sierra... • Answered on Dec 28, 2012
0helpful
1answer

Which fuse to pull to reset ecm dtc codes on 93

To clean your ECM codes just disconnect the negative battery terminal for 20 seconds.. no biggie.
12/28/2012 1:27:40 AM • 1993 GMC Sierra... • Answered on Dec 28, 2012
0helpful
1answer

Turns over but wont start

first, you should check your battery!__________tacho pro 2008
12/6/2012 3:54:33 AM • 1993 GMC Sierra... • Answered on Dec 06, 2012
0helpful
1answer

1993 GMC Sierra SLE will not re-start after stopping and turning off the engine. It will start if you let it cool down for about 10-15 minutes.

Check manifold pressure sensor if present.Check MAF sensor.Check water temperature sensor.Check O2 sensor.
10/30/2012 1:47:41 PM • 1993 GMC Sierra... • Answered on Oct 30, 2012
0helpful
1answer

4 wheel drive doesnt work

make sure that your in neutral and pressing the brake when you shift the 4wd lever
10/8/2012 5:57:51 AM • 1993 GMC Sierra... • Answered on Oct 08, 2012
0helpful
1answer

How to add power steering fluid

There is a reservoir under the hood that stores power steering fluid. That is where you add the fluid. Most likely, yours will be located directly behind a drive belt pulley, attached directly to the power steering pump, and the cap should be marked for power stering fluid. It will contain a dipstick that has marks stating minimum and maximum fluid levels with the fluid either hot or cold. If you have to add to it often, you have a leak that needs to be repaired.
10/5/2012 7:46:30 PM • 1993 GMC Sierra... • Answered on Oct 05, 2012
0helpful
1answer

I have a 1993 GMC Sierra. If the headlight or parking light switch is on nothing works in the tailight assembly. Blinkers work in the front but blink quickly.Replaced taillight circuit boards with new

I'd be willing to bet your dash lights don't work either when you turn the headlight on.change the headlight switch, it has a short, it's only about 11 dollars at advance auto, and is fairly easy to replace. my 93 chevy did same thing, changed headlight switch, problem solved
9/10/2012 12:19:26 AM • 1993 GMC Sierra... • Answered on Sep 10, 2012
0helpful
1answer

1997 chevy k1500 won,t start cold starting fluid will start truck

I would check the fuel pump relay first. You should have some fuel pressure in the lines when you turn the key on. The relay is powered for 3 seconds to boost pressure until the engine starts. The relay may not be working or the check valve in the pump may be letting fuel back into the tank which would cause the pressure to drop to zero when the engine is off. You should have at least 15psi with a TBI system and 35psi with MFI.
9/5/2012 3:34:12 PM • 1993 GMC Sierra... • Answered on Sep 05, 2012
0helpful
1answer

Truck will not shift out of park after replacing power brake booster

Sounds like the brake pedal is out of adjustment to the brake light switch. The brake light switch sends power to the solenoid that locks the shifter in park.Check the switch.
7/28/2012 4:45:23 PM • 1993 GMC Sierra... • Answered on Jul 28, 2012
Not finding what you are looking for?
Cars & Trucks Logo

508 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

K1500 GMC

  • K1500 GMC

Most Popular Question

clutch problem 1993 gmc pickup engine

  • Cars & Trucks
Loading...