Top 20
1989 Mazda 626 Questions & Answers
Turbo blown it's a Mazda
cheaper / better to go to a wreckers/junk yard and get another genuine one
turbo rebuilding is a specialist field and any modifications will affect the ECM of the car
Valve timing
there should be tiny wee marks n the pulleys and on the block, line those little marks up put the belt on and tension the belt up.
Wont Start
Going to need more than 3 words to suggest something
Tell us what you have tested so far & the results, or just
have it taken to a shop
Starts perfectly but won't idle
are their any codes either stored or open might be a fuel supply issue is it starving out or just stopping if just stopping check all related fuses if starving for fuel check fuel lines fuel filter back to the fuel pump. also it could be an injector issye
Need vacuum valve connection diagram for 89 mazda
Confirm us 1989 Mazda 626 4 Cylinders 2.2L FI or 4 Cylinders 2.2L FI Turbo
If you have any other questions or need that we send you this diagram, please feel free to get back to CONTACT US HERE.
Also keep in mind that your feedback is important and I'll appreciate
your time and consideration if you leave some testimonial comment about
this answer.
Thank you for using Fixya, and have a nice day.
Need to know where the
If you have 2.2 fuel injected engine there is no relay in it
There is relay circuit opening swith located on fuse box near bottom to depressurize the fuel system.
I have a 1989 mazda
dirt in the fuel system,or air filter is clogged and needs replaced.mybe try a fuel cleaner that pours into the tank when filling up.adrian??
Need a diagram a 1989
Autozone.com has free repair guides. I checked and they have one for your car, it has the diagrams your looking for. You just have to create and account with them to use the guides. The account is free, I use it all the time, beats buying a Haynes manual. Good luck.
How do i fix a
you have it replaced, or you replace it yourself. long involved procedure and you are going to need a repair manual which no one is going to print for you. so go buy yourself one on ebay for about 10 bucks.
What is the problem when clutch feels loose and
You need to add the clutch fluid (open the engine area and see a place where the Fluid is placed) coz it might be empty or low. It should now be the empty bottle. Please tell me if it was of help
Not finding what you are looking for?