20 Most Recent 1989 Mazda 626 Questions & Answers

0helpful
1answer

Turbo blown it's a Mazda

cheaper / better to go to a wreckers/junk yard and get another genuine one turbo rebuilding is a specialist field and any modifications will affect the ECM of the car
6/19/2017 3:30:47 AM • 1989 Mazda 626 • Answered on Jun 19, 2017
0helpful
1answer

Why doesn't my cigarette lighter work? Is it a blown fuse? Which fuse do I replace for lighter?

Your owners manual shows you location and number and an illustration of the box you can also google the image
10/29/2015 1:18:42 AM • 1989 Mazda 626 • Answered on Oct 29, 2015
0helpful
1answer

Valve timing

there should be tiny wee marks n the pulleys and on the block, line those little marks up put the belt on and tension the belt up.
4/6/2014 9:57:09 AM • 1989 Mazda 626 • Answered on Apr 06, 2014
0helpful
1answer

Wont Start

Going to need more than 3 words to suggest something Tell us what you have tested so far & the results, or just have it taken to a shop
3/29/2014 10:15:25 PM • 1989 Mazda 626 • Answered on Mar 29, 2014
0helpful
1answer

Turn signals not working

There should be A Fuse Relay Box under the Hood. There is a Flasher Relay in it for the Blinkers. Replace this Relay and it should be good. Please Rate my response,I need all the Help I can get! Thanks!
9/3/2013 4:37:47 PM • 1989 Mazda 626 • Answered on Sep 03, 2013
0helpful
1answer

No tail or stop lights working 1989 626t

Tha't's a good one, I say there is a section in the wiring grounding everything together, sounds somewhere around the driver side kick panel
2/2/2013 8:09:00 AM • 1989 Mazda 626 • Answered on Feb 02, 2013
0helpful
1answer

Car will go in gear but will not move when clutch is released,any ideas will be helpful.thanks

Either the clutch has failed, or something inside the transmission has broken.Can you shift gears with the engine running and not depressing the clutch ? Can you put the transmission in first gear and move the car by hand ?
12/12/2012 11:21:18 PM • 1989 Mazda 626 • Answered on Dec 12, 2012
0helpful
1answer

Mazda clutch damaged driveshaft

How so. Really doubt that is possible
10/25/2012 10:29:14 PM • 1989 Mazda 626 • Answered on Oct 25, 2012
0helpful
1answer

My Mazda 626 Starts but then Dies when check engine light comes on

Feul Pump
7/27/2012 5:37:05 AM • 1989 Mazda 626 • Answered on Jul 27, 2012
0helpful
1answer

Starts perfectly but won't idle

are their any codes either stored or open might be a fuel supply issue is it starving out or just stopping if just stopping check all related fuses if starving for fuel check fuel lines fuel filter back to the fuel pump. also it could be an injector issye
7/7/2012 2:22:20 PM • 1989 Mazda 626 • Answered on Jul 07, 2012
0helpful
1answer

89 mazda 626 turns over have fuel no spark replaced the ignitor

Check for power at the coil. If you have a good power and ground at the coil with no shorts anywhere, and you don't have spark, replace your coil. Try these things and let me know what you find.I hope this info helps!~subyguru~
4/7/2012 1:47:47 AM • 1989 Mazda 626 • Answered on Apr 07, 2012
0helpful
1answer

Need vacuum valve connection diagram for 89 mazda

Confirm us 1989 Mazda 626 4 Cylinders 2.2L FI or 4 Cylinders 2.2L FI Turbo

If you have any other questions or need that we send you this diagram, please feel free to get back to CONTACT US HERE.

Also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.
10/28/2011 6:31:30 PM • 1989 Mazda 626 • Answered on Oct 28, 2011
0helpful
1answer

Got a mazda 626 1989 model. blown head gasket.

You could sell it. I've just restored an 89 mazda and might be intereted in yours. If you're wanting to sell it send a price to my email [email protected]
10/28/2011 6:15:32 PM • 1989 Mazda 626 • Answered on Oct 28, 2011
0helpful
1answer

Need to know where the

If you have 2.2 fuel injected engine there is no relay in it
There is relay circuit opening swith located on fuse box near bottom to depressurize the fuel system.
6/17/2011 4:38:19 AM • 1989 Mazda 626 • Answered on Jun 17, 2011
0helpful
1answer

I have a 1989 mazda

dirt in the fuel system,or air filter is clogged and needs replaced.mybe try a fuel cleaner that pours into the tank when filling up.adrian??
3/15/2011 1:57:19 AM • 1989 Mazda 626 • Answered on Mar 15, 2011
0helpful
1answer

Overheated and now will not start. I replaced the

Run a compression check on the cylinders. You may have blown the head gasket.
1/25/2011 9:11:42 PM • 1989 Mazda 626 • Answered on Jan 25, 2011
Not finding what you are looking for?
Cars & Trucks Logo

90 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Mazda 626
1999 Mazda 626

544 Questions

2000 Mazda 626
2000 Mazda 626

410 Questions

1998 Mazda 626
1998 Mazda 626

356 Questions

1995 Mazda 626
1995 Mazda 626

269 Questions

1997 Mazda 626
1997 Mazda 626

277 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

626 Mazda

  • 626 Mazda

Most Popular Question

no tail or stop lights working 1989 626t

  • Cars & Trucks
Loading...