20 Most Recent
1993 GMC Sierra C2500 Questions & Answers
Need diagram for 1993 gmc
4.3 (VIN W AND Z) ENGINES= 1-6-5-4-3-2 --DISTRIBUTOR ROTATION: CLOCKWISE
5.0 (VIN H AND M), 5.7 (VIN K AND R), 7.4 (VIN N AND J) ENGINES
1-8-4-3-6-5-7-2 ---DISTRIBUTOR ROTATION: CLOCKWISE
ABS light is always on while 93 GMC Vandura is on.
first, check your brake fluid level and color. if it ain't transparent in the master, your fluid is contaminated, you will need to flush it. second, check all wheels for seized/broken calipers and/or wheel cylinders.
third, check all brake pads/shoes for thicknest, disk/drums for problem like out of round, they can be resuface or replaced.
We cannot get out of 1st or 2nd gear - (3rd &
sounds like a modulator problem,make sure you have vaccume going to the modulator on the tranny, start the truck leave it in park pull of the vaccume line at the tranny , if its got fluid in it then its bad, and make sure you have vaccume too it!!!!
What is the proper voltage setting at idle ??
It should be somewhere between 12 and 14 volts. The more options, like lights,A/C, brake lights ect. that you turn on the reading will change. But it should stay between 12-14 volts.
I hope this helps .
Engine chugging the cutting out
Hard to say, it could be a dirty injector to and bad fuel pressure relay or the vacuume line to the fuel pressure relay. After that you could change the fuel filter, it may be dirty and causeing your pump pressure to drop when on demand. good luck and hope this helps
Not finding what you are looking for?