20 Most Recent
1994 Mazda MX-3 - Page 2 Questions & Answers
How do you fix a blown head gasket for mazda mx3?
check your water pump and ects (engine coolant temp sensor) and just replace head gasket the other thing to check for low idle is under the throttle body is a erg valve it it what lets in more or les air depending on the temp of the engine it has coolant lines going to it and if blocked can not work of this help nz mechanic
4 cyl car will "rev"
It sounds like either the clutch plate or pressure plate. Can you move the car in gear without too much trouble? Some resistance, but can be done! Then you will need to replace the clutch and pressure plates.
It is most likely suspects.
So a 1994 mazda mx3
Colybear18,
All the indications you stated above give a clear indication that the clutches are worn completely. What is required is that you get the gear box serviced - changing the clutch disc will make the diffence you are looking for. The burnt smell you noticed was the complete failure of the clutch plate. Hope this helps.... Do have a good day.
I have a mazda mx3 gs 1993 the check engine light
Next time, when your light is on, take it to Autozone. The light comes on because your computer has detected a problem. They will read it for free. This will let you know what is wrong and what you need to fix it. That is your best bet before you are out money for parts you don't need. If you need anything else, let me know. I am here to help in anyway possible. Thank you for choosing FixYa.
I have a 1994 mazda
they are located on rear down pipe look between fire wall and engine look down between there you will see them they are most likely not the same but do work togather sensor 15 and 17 if you would like to no the numbers of the sensors hope this helps
Not finding what you are looking for?