20 Most Recent 1993 Mazda Protege Questions & Answers

You can try out some guide from here reliable-store
they also provide live chat feature for instant help and it's very useful

1993 Mazda... | Answered on Mar 12, 2019

Hope this helps...let me know and I will get a better one:


1993 Mazda... | Answered on May 22, 2018

My friend is a part time mechanic he gets his solutions from www.reliable-store.com he gets
from their every single detailed info, instructions, diagrams etc. on all vehicles, and manuals like service, repairs, parts, owner's, operations, maintenance etc.
U can get help from there
there is a girl at chat she can help you

1993 Mazda... | Answered on Mar 20, 2018

blue smoke is a sure sign of oil bleeding down from your valve seats (little rubber umbrellas inside the head on each valve) into or on top of the pistons after sitting over night..in most cases a good mechanic can do that repair with the cylinder head still on the car...the stalling is usually open close sensor ..TPS (throttle position sensor ) or spark plugs..both inexpensive easy fixes..GOD BLESS

1993 Mazda... | Answered on Jan 29, 2018

You mean even with taking the battery off for a few minutes, the light comes back on? That is after all how to erase codes and turn the light off with OBD-1.

Maybe he means the wire from the ecm up to the dash for the CEL signal. Maybe that wire is getting current from another wire in the wiring harness.

1993 Mazda... | Answered on Dec 15, 2017

Indications are that you have a defective buckle - possibly some liquid or dirt got into the female end of one of your belts and does not allow a good connection when activated. Sometimes you can clean enough to restore function, sometimes a replacement part - scrap yard - has to be installed.

1993 Mazda... | Answered on Nov 10, 2017

check the line from the reservoir to the transmission for leaks, unfortunately its most likely the slave cylinder in the bell housing. Look under the bell housing of the transmission for any brake fluid at the weep hole as that would be your indicator of the slave cylinder leaking.

1993 Mazda... | Answered on Nov 02, 2017

Sounds like u have a bad fan for 1,Im sure who disconnected it may have found an expensive problem they didn't want to deal with (electrical, ac compressor etc) Good luck, have it ckd

1993 Mazda... | Answered on Apr 07, 2017

turn key on and test both sides of fall fuses with test light to find any bad ones

1993 Mazda... | Answered on Feb 24, 2016

its along way from the trunk to the back seat. check the back window,and the doors, get a water hose and have someone inside check it for a leak. Water in the trunk is usually caused by bad seals at the tail lights. But water in the trunk usually stays in the trunk and spare tire area. If the car has been wrecked, then who knows.

1993 Mazda... | Answered on Nov 05, 2015

something must be grounding somewhere

1993 Mazda... | Answered on Feb 16, 2015

Not finding what you are looking for?
1993 Mazda Protege Logo

247 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts


Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Protege Mazda

  • Protege Mazda

Most Popular Question

after having fuel pump replaced in

  • Cars & Trucks