20 Most Recent
2004 Pontiac Bonneville Questions & Answers
2004 Bonneville SLE. Driver door power windows switch assembly. All of a sudden, no window, lock power to passenger door or window, and both rear doors or windows. Driver's door and window work fine.
You probably have no idea how these work - power locks an power windows. Control modules inside each door make them work .
Power Windows Operation
The vehicle is equipped with power windows controlled by the door modules. Each passenger door window can be operated, either from a switch built into the driver door switch assembly (DDSA), or from a switch mounted locally to its associated door. The driver door window can be operated only from the driver door window switch built into the DDSA.
When a window is operated from the DDSA, the DDSA interprets the window switch signal as a specific window switch request and sends the information to the driver door module (DDM) via the power door serial data circuit. The DDM examines the request and checks to see if it has received any class 2 serial data messages from any of the other vehicle modules (i.e. ignition switch position) prohibiting the movement of the window. If the window being operated is the driver door window, and if no prohibitive class 2 messages have been received, the DDM then applies voltage and ground to the driver door window motor to move the window glass as requested. If the window being operated is a passenger door window, and no prohibitive class 2 messages have been received, the DDM sends the request, via the power door serial data circuit, to the appropriate passenger door module. The passenger door module then applies voltage and ground to the passenger door window motor to move the window glass as requested.
When a passenger door window is operated from the power window switch mounted locally to its associated door, the passenger door module first checks to see if the DDM has received any prohibitive class 2 serial data messages. If there are no prohibitive messages, the passenger door module powers the associated passenger door window motor.
Both front door windows have the express down feature. This allows the front door windows to be fully opened by momentarily pulling the appropriate window switch lever to the second detente and then releasing.
Hook up a scan tool an check for DTC'S could save time in diagnosing this . Also on a vehicle that old checking for broken wires in the door flexes would be good to do. Opening an closing the doors a million times causing wires to stretch ,break et... The power windows on your vehicle has a circuit breaker for battery power ,not a fuse. The power locks do have a fuse for power. Won't think circuit breaker an fuse bad at same time .
Color codes for 2004 Bonneville radio
why don't u try online
some websites deal in it real time.. along with solutions to problems how to repair fix service n d all
reliable-store is pretty good.. they also have live assistance
Light bulb/radio/lights equalizer - burnt out
You first must gain access to the bulbs. Then remove them. They should have a number on them allowing you to Google them and locate a source for new ones. Last, reinstall the new ones and then reinstall the radio/dashboard.
2004 Pontiac Bonneville SLE How do I turn off the E-brake Chime?
disconnect a wire to the chime
cables that no longer in production can be made in a reputable brake shop from the sample
there are cable makers in industry that make cables to samples so find a cable /chain retailer and take the sample to them
it seems strange that a 3 year old car does not have spares still available so I would be checking around spares departments or brake repairs shop as well
Fireing order 2004 pontiac bonneville 4.8
4.8? that didn't exist for a '04 bonneville
Buick 3.8L engine - 1-6-5-4-3-2
Cadillac 4.6L Northstar engine - 1-2-7-3-4-5-6-8
The cadillac motor was only in the GXP package
Do you access the blower motor on an 04 bonneville from under the hood or passenger side behind the glove box?
passenger side under the glove box ,
Remove the right side sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.
Disconnect the electrical connector (1) from the blower motor.
Disconnect the blower ventilation tube (2) from the module.
Remove the blower motor screws (3).
Remove the blower motor from the housing.
Instrument Panel Insulator Panel Replacement - Right Side
Removal Procedure
Remove the fasteners at the rear edge of the insulators in order to disengage from the lower instrument panel.
Pry out the retainers in order to release.
Turn the heater temperature sensor 1/4 turn in order to release and allow to remain connected to its wire (CJ2 vehicles only).
Disconnect the electrical connectors.
Slide the insulator rearward in order to remove.
Not finding what you are looking for?