20 Most Recent 1993 Nissan Pickup Questions & Answers

I think you have checked the major points, but if the transmision hung loose long enough it could damage the U-joints and motor mounts. The easy way to check the u-joint is to put the truck on ramps and put it in gear, then get under the truck and attempt to turn the drive line. If the drive line move 1/4 turn or more the u-joints are damaged. The motor mounts can be checked when the motor is running. Standing over the motor while someone else revs the motor you can see the motor move from side to side, more than three inch movement could indicate loose or broken mount. The clutch may be the culprit but I would check these first.

1993 Nissan... | Answered on Jul 16, 2019

the mark to the right of the pully will be 0 .. it will be like this. 8 6 4 2 0

1993 Nissan... | Answered on Mar 25, 2019

if you think the four wheel drive it not being use it very likely that the link that engages the four wheel it rusty or the gear shift inside the gear box will not slide by some wearing abstraction caused by wear and tear

1993 Nissan... | Answered on Dec 21, 2017

Inside door handle should have some screws that need to be removed and the window crank will have a c-clip behind it . or some you have to pop the cover off the window crank

1993 Nissan... | Answered on Oct 14, 2017

Possibly a bad connection on the positive side coming from the battery or a weak ground. Check where the leads join the terminal clamps. Has the battery been verified as good? It doesn't take a lot of amps to run lights but it does to turn over the engine. Jump starting it does not require a fully charged battery.

1993 Nissan... | Answered on May 01, 2017

Have an alignment done.
It requires specialized equipment

1993 Nissan... | Answered on Jul 14, 2016

Can you do a compression test?

There may be something amiss with the piston or valve.. and it's usually the exhaust valve that has burnt/split, allowing compression to be kicked straight out of the exhaust. The symptom of a burnt/split exhaust valve is akin to a misfiring spark plug

1993 Nissan... | Answered on Apr 23, 2016

Could be bad speed sensor.

1993 Nissan... | Answered on Aug 23, 2015

where can i find assembly diagram for nissan vanette c22 manual transmission

1993 Nissan... | Answered on Jul 02, 2015

missing can be from vacuum leaks, faulty injectors , low fuel pressure, faulty coil, ignition module, low voltage from faulty alternator or bad battery supplying less than required voltage to the electrical system

1993 Nissan... | Answered on May 20, 2015

check in your chiltons motor manual tell all about it

1993 Nissan... | Answered on Mar 23, 2015

open the tailgate, you should see the screws behind that assembly


video is just an illustration

i'm attaching a pdf copy of the service manual so you can see the actual drawing on page BF-7


1993 Nissan... | Answered on Mar 20, 2015

open the hood and see

1993 Nissan... | Answered on Mar 04, 2015

NISSAN should have an online manual or their are websites dedicated solely to manuals.

1993 Nissan... | Answered on Feb 10, 2015

if the test was just recently done have the customer go back to the place that did the test and ask for another printout. that`s the only way to get the readings.

1993 Nissan... | Answered on Jan 22, 2015

do you have power coming out of the H/L switch

1993 Nissan... | Answered on Jan 21, 2015

check H/L switch or relay in box under hood by battery

1993 Nissan... | Answered on Jan 21, 2015

Not finding what you are looking for?
1993 Nissan Pickup Logo

453 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts


Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pickup Nissan

  • Pickup Nissan

Most Popular Question

not unlock doors truck remote changed

  • Cars & Trucks