20 Most Recent
- Page 3 Questions & Answers
The key will not turn in the ignition the steering wheel is not locked.
Is your key worn out? If it is have a new key made. If key is fine spray some lube into ignitio key cylinder. Use a nozzle to get as deep as possible into cylinder cavity. Then let lub sit for a couple of hours. After, insert key and pull up, down and to sides until it releases. If it does not release you will need to pull out cylinder and lub all tabs or just replace cylinder.
on Feb 07, 2016
Front wheel drive
Who changed the seal? If you paid for this big job, naturally, return it. Are you sure it was leaking at the seal? Cracked trans body, out of round trans shaft? look into if it has 2 seals on it also, 1 a rope seal covered by a rubber seal (a seal kit) good luck)
on Oct 22, 2015
Two things to check:
1. Make sure you do not have an air bubble in your cooling system. Easiest way is to park facing uphill and let the car cool off. Remove the radiator cap, start the car and let run until the thermostat opens. If there are air bubbles in the cooling system the should be forced out. Top off fluid.
2. Are you sure that the cooling fan is running? When the car is getting hot, open the hood and make sure the radiator fan is actually turning.
on Sep 20, 2015
Not finding what you are looking for?