20 Most Recent 2003 Nissan Murano Questions & Answers

It appears that others have had the same thing happen to them https://www.google.com/search?q=2003+Nissan+Murano+SL+won%27t+move+either+in+Drive+or+Reverse ..

Check your Speed sensor, Idle air control valve, then check your Accelerator Cable that attaches to the back of your (gas pedal) going to your throttle body.

THEY NEED 3 THNGS WORKING TOGETHER SPARK, FUEL AND TIMING . IF YOU CAN NOT TEST YOURSELF CALL A GOOD LOCAL MECHANIC OR YOUR LOCAL DEALER

Is this P1800?

I personally like KYB. They're more of a performance strut and will retain the same handling and ride as the OEM struts. Pretty durable from my experience as well. If you're looking for a more "cushy" ride while sacrificing the handling a little, Monroe and Gabriel are both good second choices.

2003 Nissan Murano Service Repair Workshop Manual INSTANT DOWNLOAD for the easy solution download the pdf file

The fuel filter is inside the gas tank mounted to the fuel pump.

believe it or not: 1-2-3-4-5-6 see diagram 3 5 6 VIN firing order Ricks Free Auto Repair Advice Ricks Free Auto...

Check the dimmer switch

Google is your friend. Use it.

Did you check the fuse

purge valves are usually near the throttle body in engine compartment

Have the fuel system pressure tested. Sometimes the check valve in the pressure regulator fails. Testing will ensure which parts aare failing. could be the pump or the regulator.

It goes into safe mode because the system detects a serious fault somewhere.

the engine turning over is not a starter problem flooding is , broken timing belt is , no fuel pressure is , no fuel in the tank is have the fault codes read to determine the fault

a truly horrible gearbox,seems the gearbox ecu has failed

code p0087 referrers to the heated oxygen sensor (HO2S) it is located in the exhaust manifold before the cat converter it has a heater in the assembly and its purpose is to read the exhaust gas composition and report to the ECM so that the air;fuel mixture can be adjusted it will all e in a workshop manual for that engine

If the converter is restricted then there is no way to clean it other than taking it off and knocking all the catalyst out. Which is *******