Top 20
1994 Nissan Altima Questions & Answers
A/c motor problem
One of the blend door motors on the A/C Heater assembly may be stuck or defective or one of the linkage arms may have fallen off.Slide under the dash a bit and slide the temperature button.
You may have to take a panel or two off above the passenger/drivers feet area.
Can you see any movement on any linkage or locate the noise at one of the blend door motors?
You might just see a linkage arm off and you may be able to reattach it.
Maf sensor
was it a new maf fitted or a referbed unit most new mafs sold only have a 6 month warranty are there any other fault codes present or just the maf fault code I agree with you a fault in the maf can make the car behave that way the maf has a few functions with sensors in the unit other sensors can also cause the engine to behave that way 02 sensor / faulty transmission solenoids and TPS different car maker i have just done a diode jump at the ECU bypassing a faulty sensor in a maf so far maf throws a fault code but no more problems
How to change 1994 altima fuel pump
? 3:39
https://www.youtube.com/watch?v=nnCmk9ZAr28
Mar 23, 2014 - Uploaded by Shogun Bug
Replacing fuel pump on a 1996 Nissan Altima ... I got the pump out and put the new fuel pump in but now my ...
Were do I find the thermostat on my 1994 nissan altima to replace it?
Here is a diagram showing where the thermostat is located on a 1994 Nissan Altima. Most vehicles are fairly similar as well the main water hose that goes to the engine is usually right next to or attached to the thermostat housing. Also once you take this hose off to get the thermostat you are going to need the bleed the coolant system because there will be air in the system. A simple google search or wikihow will show you exactly how to bleed air out with pictures and simple instructions. Good luck.
Not finding what you are looking for?