20 Most Recent 1983 Nissan Pulsar Questions & Answers

0helpful
1answer

How to locate replace flasher unit in 1993 nissan pulsar

try on the fire wall passengers side I used a new z200 off a commodore witch is rather universal
3/7/2015 3:30:28 AM • 1983 Nissan... • Answered on Mar 07, 2015
0answers
0helpful
1answer

Car runs smoothly one day,

try having throttle postion sensor checked
8/26/2011 2:08:32 AM • 1983 Nissan... • Answered on Aug 26, 2011
0helpful
1answer

Right blinker on nissan pulsar not working.

That FAST BLiNKiNG means one of the bulb in the right signal light is BUSTED and needs to replace, turn on your HAZZARD switch and look at the right side and inspect what bulb is malfunctioning!
Taaah!
11/11/2010 1:09:50 AM • 1983 Nissan... • Answered on Nov 11, 2010
0helpful
1answer

I have a 99 nissan pulsar LX N15 having problems

I have same/similar problem.... if this problem happens off and on... runs well one day and next day is jerky-stalling then it's more than likely your airflow meter
2/26/2010 9:07:13 PM • 1983 Nissan... • Answered on Feb 26, 2010
0helpful
1answer

Where is the fuel pump on a 83 nissan pulsar

Ok this petrol pump in cylinder head near the intake manifold .... THANKS
2/11/2010 2:36:09 AM • 1983 Nissan... • Answered on Feb 11, 2010
0helpful
1answer

83 nissan pulsar NX

Check he mas air flow censor, 02 censor and the throttle position sencer. Assuming you have done all the required maintenance on the vehicle like the air filter, oil, spark plugs, wires, cap and roter.
2/8/2010 10:12:57 AM • 1983 Nissan... • Answered on Feb 08, 2010
0helpful
2answers

Rear brake lights and front parking lights

I would guess the head light switch would be defective.You need to look for the plug in to be burned a little also,on the back of the headlight switch.
10/13/2009 10:50:34 PM • 1983 Nissan... • Answered on Oct 13, 2009
0helpful
1answer

Removal of Front Door Handle Pintara Nissan

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.
9/21/2009 12:50:51 PM • 1983 Nissan... • Answered on Sep 21, 2009
0helpful
2answers

Cant open the bonnet

Hi there, remember the bonnet opens back to front so you need to lift it from the windscreen side, hope this helps.
7/7/2009 4:27:46 PM • 1983 Nissan... • Answered on Jul 07, 2009
0helpful
1answer

Transmission slipping when warm or hot?

Well it could be that the gear oil is low or the gearbox's gear teeth have worn out causing the gears to slip from their slot at higher speeds. Also check the clutch plates...............sodeep
5/8/2009 12:07:32 PM • 1983 Nissan... • Answered on May 08, 2009
0helpful
1answer

Pulsar 2003 sedan unable to

push weight on door, then pull handle. if solved, door latch requires adjusting?
5/8/2009 11:49:23 AM • 1983 Nissan... • Answered on May 08, 2009
Not finding what you are looking for?
Cars & Trucks Logo

Popular Tags

27 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pulsar Nissan

  • Pulsar Nissan

Most Popular Question

right blinker nissan pulsar not working

  • Cars & Trucks
Loading...