20 Most Recent 1997 Oldsmobile Cutlass Supreme - Page 7 Questions & Answers

pull the hinge pins & unplug the wire harnes to th switches to pull out of door

A rally complete set of hand tools, wrench, sockets ratchets extensions all of it.

TAKE OUT INSURANCE OR REPAIR THE FITTING THATS FAILED

O2 Sensors are in the exhaust systemIn the pipe from the engine to the exhaust converteror in the converter inletThat is the upstream sensor, used to control thefuel injection pulse width or fuel trim.There are other downstream O2 sensors, called monitors,that don't get replaced unless they failThe ones closest to the engine get replaced at 100,000miles, on all vehiclesA Sensor Code does not mean anything failed orneeds replacingYou need the codes & have to test to find a solutionSome vehicles have 4 sensors,if they have dual exhaust

Sorry, your question is too vague to offer you much help with your problem. WHICH lock switch is not working? The one on the car? The one on the remote unit? Is it just one of the lock switches that do not work or are ALL of them not working? Please be specific.

its on the bottom of the dash on the left side of the steering colum

raise the caliper pass the rotor and slide the whole caliper off the float pin

Its a faulty turn signal switch.Try this,push down and hold brake pedal while pushing on the hazard switch and if the brake lights come on then replace the signal switch.