20 Most Recent
2003 Pontiac Aztek - Page 8 Questions & Answers
I can't open the hood of my 2003 Pontiac Aztek.
The release is under there - get a flashlight and look for a metal piece sticking into the hood. It should move either left, right, forward, or back to release from the hood. You really need to get down below the hood to find it.
Ignition modules locked
Hi!!! I'm having problems with my car: when I run it for a while and turn it off and try to start it again, it wouldn't start. It cranks but it does not start right away.However, there is gas injecting into the chamber.
2003 aztek water on floorboards, not solvent
theres a box under the dash with a filter and drain tube they are what's probably clogged. your best bet is to get a Hanes book or chilton from your parts store to walk you through it if your set on doing it your self but I will warn you it's a job and it's aggravating.
Water on floorboards when ac runs
Look under the passanger side of the car,There should be a drain hose next to the firewall thats sticks down,It should be a black hose or tube that is cut at an angle on the end,pinch the bottom of the hose and see if warter darins out of it,if it does use small wire to clean inside of hose(evaporator hose)
Engine stumbles then dies
check to see if you have coolant in your engine oil. those engines have problems with the lower intake gasket leaking and this puts water/oil ito your combustion chamber, also runs hot after it gets worse. I would say all of those engines do this after a while.
I have a 2004 Pontiac Aztek. The AWD Disable and
The AWD Disable and Anti Lock lights can result from a bad wheel bearing as well as a bad speed sensor. They'll also come on if you have the spare tire on. Not sure if the acceleration problem is linked to the warning lights. Most car part stores have scanners they can check out the problem.
Not finding what you are looking for?