20 Most Recent 1991 BMW 3 Series - Page 3 Questions & Answers

Probably the alternator but I'd check it to be sure first. Many auto parts stores will check you whole charging system for free so call around.

thanks.

It's a bulb replacement. If it's anything similar to my Audi, there is a cover on the back of the headlight housing that you pop off. Then you can reach in, pull the wire connector off the bulb, and unclip a metal retainer over the bulb, and pull the bulb out. Installation of the new one is the reverse. Just be SURE not to touch the glass part of the bulb. Skin oils can cause a halogen bulb to burn very hot and burn out very quickly. If you do touch the glass, wipe it gently but thoroughly on a cotton cloth to clean it off before you install it.

Terrible Pictograms! I don't read any as parking brake, but the first fuse is ABS and brakes. Parking brake fixes https://www.google.com/search?q=2017+bmw+x3+fuse+parking+brake

Fuse Box Diagram BMW X3 (F25; 2011-2017)

https://fuse-box.info > bmw > bmw-x3-f25-2011-2017-... Here you will find fuse box diagrams of BMW X3 2011, 2012, 2013, 2014, 2015, 2016 and 2017, get information about the location of the fuse panels inside the car ...

Hi my name is Stanton I have a problem with my bmw x3 2004 model when it is in 2 gear and when it must change to 3 gear it go into limp mode

On this website you find fuse box diagram and description for BMW X3 series https://www.autogenius.info/category/bmw/x3

Hi Check the gear box oil also get the gear box serviced. change the filter in there. Thanks

if you can find a replacement logo you can super glue it back on but they probably dont sell just the logo so youll have to replace it with a new airbag which will have the logo already on it. (just another way to get money from you is all).

Good idea to get your brakes checked out. If there is a problem then could cost more if you leave it.

Water in the gas tank was probably the reason your head gasket blew in the first place. Water will not compress but in the cylinders there is compression. The water has to go somewhere, it blows out the weakest spot. The head gasket. You need to get the gas tank drained as soon as possible and get a timming light before you burn a valve. They have loaners at many auto parts stores. Call around for a loaner or get a cheap one at a swap meet or flea market.

hi ask on this site or look around https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjr2fD3_vLXAhXrCcAKHU3yDRQQFggpMAA&url=http%3A%2F%2Fwww.bimmerforums.co.uk%2Fforum%2F&usg=AOvVaw3-EqoWOPdnHw-lE2XybejZ

run the fault codes problems with running rich include:- injectors not working properly excessive fuel pressure leaking injector seals heated oxygen sensor failure ( they are located in the exhaust manifold /pipe before the cat converter and are used to read the exhaust gas composition and report to the ECM which adjusts the air/fuel mixture accordingly ambient air /BARO sensor which report the air temp/pressure to again allow the ECM to set mixture The strong fuel smell can be from fuel leaks , flooding --as stated with injectors or an EVAP system vent solenoid problem The first 4 possibles would be the most obvious place to start especially with a fault code reading

Elizabeth, it happened with me as well. I thought it was not working but in reality I was just not doing the procedure right. That button is only used to connect a bluetooth device. You have to keep pressed for 3 seconds and then turn ignition on if i am not mistaken, but the exact procedure is in the car booklets. If you want i can check it for you. All the best, Sandor

Hi You have a week battery and you need to replace it.