20 Most Recent 2005 Mazda Tribute - Page 9 Questions & Answers

Try spraying the bottons with wd-40 this may help

replace the crankshaft position sensor

Okay, you were getting code P0306, and a P0316. You have replaced plugs and swapped coils around are you still getting the code P0306? or is it a different code for a different cylinder now? Replacing your crankshaft position sensor in this case will merely waste your money. Its doing its job, the P0316 is telling you you had a misfire in the first 1000 revolutions of your engine at startup, the P0306 is telling you its probably cylinder #6 that had the problem. there is no code there indicating your CKP is bad.Now if you swapped your coils and the misfire is still on cylinder 6, its either injector problem, or base engine. If the misfire has moved to another cylinder, replace that COP.Hope helps.

For water pump replacement i suggest you to check the help link provided below.

click the link below :----

Water pump replacing procedure for all vehicles?

http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html ---------

HOW TO REPLACE A WATER PUMP

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

------------------ How to route Water Pump Belt for 1992 Oldsmobile ?

http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

--------- How to replace Water Pump on Car ?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

--------- How to Remove Water Pump?

http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

------- Where is Water Pump located ?

http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html

-----------

This will help. Thanks.

could be a random misfire, check spark plugs, if that dosen't work you may need to replace coils

may just be the idle control sensor

Cut old belt off and slip the new belt on and bump starter to get on pulley