20 Most Recent
1992 BMW 3 Series - Page 2 Questions & Answers
Ok i start my bmw 1992 325i take bleeder screw out
Just did my 95 525i. Most importantly, make sure all of the air is out, then tighten the bleeder. Let it run. If the reservoir is over flowing than it's over full. Keep an eye on the temp. gauge for bout 15 min. If it goes over normal operating temp. you still have air in the radiator and need too bleed more.
1991 BMW 325is Question: do you have to remove the
IT should not be necessary to do this. Loosen off the belt /belts and when you have the one needing replacement place a section of the belt over a fan blade and turn the fan and place the belt over the next blade and son until all the belt is in front of the fan. pull the belt out from In front of the fan. Replace the belt buy by a reverse procedure.
Fule pump and fule filter,s
The fuel pump is located in the fuel tank and is accessible once the rear seat cushion is removed and, the filter is located Under vehicle, driver side, below seating area,
driver side of fuel tank, mounted on frame in fuel
line.
Please rate and have a great day:)
Not finding what you are looking for?