Top 10 1999 Mercedes-Benz E-Class Questions & Answers

you need to have the airbag system checked...srs stands for supplemental restraint system....as long as that light is o the airbag may or may not work or may go off when it shouldnt

If you call your merc dealer they should give it to you on the phone, if not have a look at this web site, if not, then if you take out the unit and let me know the s/no: i will see i have it.
http://www.radio-code.co.uk/code-entry-help.php

[email protected]

hi,no you can remove the red tag,but it was no dipstick,like before,only the dealer have a tools for measurement oil level,if notice some oil,you have to bring your car to dealer ,ty

the fuel pressure regulator is on the fuel injector rail. it is where the fuel line for input connects to

Je recherche le code de la radio Mercedes Benz audio 10 cd A 1708200389 Model n° MF 2910 Fabriqué en France S/NO AL 2910 1 0429494 B

brake light switch ,that's the part you need to replace to fix that BAS/ASR light. It's a $20 US part, a screwdriver, and 15 minutes to fix.

common issue. take out your spare tire and use it to hit the inside of the wheel. this will knock it loose and save you excessive effort. once you are done you get anti sieze and apply it to the centre of the hub and install the wheel. torque is about 90 ft lbs..

AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
2. The code number for the radio is advised to you on the enclosed CODE CARD.
3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.

AR82.60-P-7502-01B Coding Radio
(MODEL all with CODE (353) Audio 30 APS with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker) with CODE (512a) Radio MB Special with traffic news decoder, with RDS.)

1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
2. The code number for the radio is given on the enclosed CODE CARD.
3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.

mbusa.com , for 2000 year

CODE P1519 CAMSHAFT TIMING RIGHT CYLINDER BANK SIGNAL RANGE PERFORMANCE. * CODE P1386 FUEL INJECTION CONTROL MODULE INTERNAL FAULT.