2006 Mazda 3 - Answered Questions & Fixed issues
Error code U0101: Lost Comm with TCM
i do have the same problem and i took the car to 5 differant mechanic an dget no solution the aaamco the petboys the mazda dealer another transmission specialist please let me know if u have any solution
2/22/2023 5:29:59 PM •
2006 Mazda 3
•
Answered
on Feb 22, 2023
•
21,487 views
When my ac comes on on a hot day the air smells
Hi and welcome to FixYa, I am Kelly. Actually if there is mildew in the system it takes a serious cleaning of the evaporator coil and near by plastic housing / ducting to get rid of the smell. Mildew usually starts forming on the evaporator coil and compartment when the compartment drain gets to be really slow from debris or a dust clog. You can try filters and air fresheners but all they will do is mask the mildew odor. Once the mildew routine starts the only real fix is a serious cleaning of the evaporator coil, compartment and nearby air ducting. Often it takes a good mild and mildew remover to get rid of the problem completely. The evaporator compartment will for sure have to be opened up. If a service shop is going to do the cleaning job correctly they will most likely pump out the freon in the AC system and remove the evaporator coil for proper cleaning. It is not a cheap fix as it is labor intensive and requires the AC system to be drained and re-serviced. Demand that they clean the compartment drain during the cleaning process. My comments are what it really takes to purge the mildew from the AC system correctly. Your call as to fix it or live with it.
Thanks for choosing FixYa,
Kelly
11/15/2022 11:16:52 AM •
2006 Mazda 3
•
Answered
on Nov 15, 2022
•
686 views
ABS warning light and parking
It's possible but not likely. Check for damage to wheel speed sensors. Also check brake fluid level in reservoir.
8/8/2017 2:05:21 PM •
2006 Mazda 3
•
Answered
on Aug 08, 2017
•
1,413 views
After sliding into a snow
possible that the harnesss and connections to the TCM are damaged ,full of snow or water
it indicates that the torque converter clutch servo/solenoid is not getting a message about the selector position or is damaged
5/31/2017 2:59:56 AM •
2006 Mazda 3
•
Answered
on May 31, 2017
•
107 views
Not finding what you are looking for?