20 Most Recent 2008 Pontiac G6 Sedan - Page 3 Questions & Answers

0helpful
1answer

P0601 code

PCM power train control module (computer) failure. Do not buy the part from a auto parts store. Buying a rebuilt one may not be wise either. The car dealer is the best place to buy a new one to make sure that you get a very good replacement part. But I will leave it up to you to where you get a new part. This code number only is for the PCM only.
6/23/2014 7:27:55 PM • 2008 Pontiac G6... • Answered on Jun 23, 2014
0helpful
1answer

Where is the VCT located on a 08 Pontiac G6 and is it easy to replace myself?

The FSM cover this 100% as does ALLdata.com like all DTCs (you forgot yours, that be bad.....) the car store scan too can in fact miss many important other DTC errors that greatly help solving the riddle. in all cases the PCM sees an VCT error in all cases it can be these things. (FSM shows ways to find out) read it. 1: the sensor bad 2:its wires are bad, cut or it fall off. 3;the cam driver is loose, change or belt as the case may be. 4: the actual VCT bits are bad. since NO DTC posted all answer WILL BE wrong. next time get a real shop to scan car with a real scan tool that reads all.GM codes, not the O;really cheap box. the post those. some CODEs do say ,exacltl what is wrong. for example, the sensor voltage it so high. that is a bad sensor or wires. other codes will decode to like, the cam angles are changing oddly. (lots of causes)
6/17/2014 5:28:52 PM • 2008 Pontiac G6... • Answered on Jun 17, 2014
0helpful
1answer

Why is my car making noise when stopping and exiting car? I can duplicate noise by rocking front end.

You either have a ball joint or stabilizer link going bad causing the noise. Either that, or whom-ever is changing your oil has not been greasing these fittings that have been installed.
5/27/2014 3:46:22 AM • 2008 Pontiac G6... • Answered on May 27, 2014
0helpful
1answer

Why is my car making (dry) noise when stopping or getting out of car? I can duplicate noise by rocking front of vehicle.

By rocking do you mean rocking the car up and down? When you put on the brakes does the car lunge or dip forward? If so, the problem may be the front struts. The struts on a car are a commination of shock absorber and spring. If the strut is shot the car will bounce up and down. Struts are replaced as pairs. Have the car checked out at Firestone Tire or Monroe Muffler, or if you have a local repair shop that you use, go to them, and ask for an inspection of the front struts.
5/26/2014 4:29:12 PM • 2008 Pontiac G6... • Answered on May 26, 2014
0helpful
1answer

Why is my car making Dry noise when stopping or exiting car I can duplicate noise by rocking front of car.

Need more Info don't know what a dry noise is.
5/26/2014 3:48:34 PM • 2008 Pontiac G6... • Answered on May 26, 2014
0helpful
1answer

Last year at times my roof would stop part way through when it came to raising it or lowering it. Now it doesn't work at all. What do you think is the problem?

check to see if you have power at the switch... that model has all the little flaps right? they are known for all kinds of problems :-(
5/22/2014 2:52:18 AM • 2008 Pontiac G6... • Answered on May 22, 2014
0helpful
2answers

Why is the air bag light on in a pontiac g6 se1 2008 and how to fix?

Did the thief remove the air- bag? They are valuable items on the black-market. Take your Pontiac to the local GM dealer, and have it checked-out. Note that the thief may have done other things: 1. hidden drugs inside the door-panels (don't cross an international border that uses drug-sniffing dogs) 2. drained oil from the differential or transmission or engine (something will seize-up if you drive any distance without oil) 3. drained brake-fluid (unable to stop your vehicle) Get it towed to the dealer for a thorough inspection.
5/10/2014 5:17:41 AM • 2008 Pontiac G6... • Answered on May 10, 2014
0helpful
1answer

P0141 p0036 p0054 pontiac

Check your fuse and replace any that are burnt out. It is possible that it your heater on your O2 sensor shorted that it blew the fuse.
4/10/2014 10:08:48 PM • 2008 Pontiac G6... • Answered on Apr 10, 2014
0answers
0helpful
1answer

Pontiac g6wont start

The computer for your car has a specific program for that car. You need to have the second computer flashed with your program, mileage and VIN number. It is extremely rare that a computer from another car, even the exact car, will work without the program being flashed.
3/22/2014 3:38:05 PM • 2008 Pontiac G6... • Answered on Mar 22, 2014
0helpful
2answers

Acted like it was not getting enough gas; asked Star and they gave me the codes P0420, P0101, and P0068.

Google the codes and you should find explanations for each. AutoZone has free repair manuals online as well.
3/22/2014 2:49:11 PM • 2008 Pontiac G6... • Answered on Mar 22, 2014
Not finding what you are looking for?
Cars & Trucks Logo

383 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2006 Pontiac G6
2006 Pontiac G6

1,332 Questions

2005 Pontiac G6
2005 Pontiac G6

423 Questions

2009 Pontiac G6
2009 Pontiac G6

172 Questions

2008 Pontiac G6
2008 Pontiac G6

174 Questions

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

G6 Pontiac

  • G6 Pontiac

Most Popular Question

remove oil pressure sensor

  • Cars & Trucks
Loading...