20 Most Recent 2007 Saturn VUE FWD 4 - Page 6 Questions & Answers

key fob and door unlock button will not unlock all the doors ???? None ? Drivers door lock , passengers doors ???

Check to see if your Radio (Acc) or the Radop (Batt1) fuse is blown on the Interior BCM board. The fuse board is behind panels in the console area.

The models ran from 2002 to 2007 as the first generation and 2008 to 2010 as the second generation. So there is a good chance the CD player will fit. The only thing to watch for is if there was a factory option upgrade to the head unit. This could affect wiring. As long as the two units look exactly the same and you've got the unlock code you should be able to fit and use it.

Hi. Thanks for your question. For assistance on intermittent starting issues you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

What Dealership ?????? Saturn dealers are no more . What is it you would like to know ? Complex electronic's involved . Ignition switch is low voltage input to the BCM - body control module. Have seen this problem your having before , BCM problem ! Service engine light on ????? What DTC'S - diagnostic trouble code's are stored , same for air bags an Traction control "OFF" What code's . Any code's stored in any module ? Do a full vehicle scan . The body control system consists of the body control module (BCM), communications, and various input and outputs. Some inputs, outputs and messages require other modules to interact with the BCM. The BCM also has discrete input and output terminals to control the vehicle body functions. The BCM is wired to the GMLAN High speed serial data buss and the GMLAN Low speed serial data buss and acts as a gateway between them. If the BCM does not communicate the vehicle will not start due to the inability of the engine/powertrain control module (ECM/PCM) and vehicle theft deterrent (VTD) control module to communicate without the BCM providing the gateway function. Power Mode Master This vehicles BCM functions as the power mode master (PMM). The ignition switch is a low current switch with multiple discrete ignition switch signals to the PMM for determination the power mode that will be sent over the serial data circuits to the other modules that need this information, and so the PMM will activate relays and other direct outputs of the PMM as needed. Refer to Power Mode Description and Operation for a complete description of power mode functions. Your best bet , try a different dealer .

Wheres soubd coming from...front or rear. Sound only when applying brakes?

My guess is, it is telling you the horn relay is absent/defective? Put the relay back. It may be the relay is the problem or maybe not. Look for a code.

On YouTube under Saturn starter replacement a video by richpin shows the starter replacement for Saturn . He is a professional mechanic .

Is the lock out activated ?

It's either the switches or the wiring. Get out your voltmeter and start tracing out the circuit.

4 quarts = 3.5

have vehicle scanned if their are any codes pending or active remote start wont work --also may have lost program with fob which a dealer will need to flash

Sway bar links.Cost $12 for cheap line and $40 for better, each.

May want to check the bulbs on the trailer to ensure the connections are solid and the wiring is in tack. May be a weak ground wire connection.

hola trata de hacerle una lavada alos inyectores y cambio de aceite y bujias si sigue la falla escanealo para ver que no sea un sensor