20 Most Recent 2008 Dodge Durango Questions & Answers

0helpful
1answer

No running lights on trailer, but have stop and turn. 08 Durango with two package

The Spaminator Mar 30, 2021 Hi Paul Beare, check the earth return on the car socket is good
3/30/2021 11:56:10 AM • 2008 Dodge... • Answered on Mar 30, 2021
0helpful
2answers

DTC P0302 code

check for 2 things, CTS, and the injector, reason, if the injector is clogged or misfiring, you can still have and issue, i`m a mobile mechanic, if you`re in the long beach area email me back If you need further help, reach me via phone at https://www.6ya.com/expert/reginald_d1f35dc049b0256a
11/12/2016 3:56:47 PM • 2008 Dodge... • Answered on Nov 12, 2016
0helpful
1answer

My break lights not working. Turning signals and all other lights work.

change brake light bulb
9/18/2016 7:32:14 AM • 2008 Dodge... • Answered on Sep 18, 2016
0helpful
2answers

Power windows stop working on my dodge durango

Blown fuse
9/9/2015 2:49:40 AM • 2008 Dodge... • Answered on Sep 09, 2015
0helpful
1answer

Key fob just died put in new battery still dead any ideas?

The FOB is good and the receiver in the truck died. There are scanners out there that tests FOBs. I have one and do it for free. It takes like two seconds to test.
4/19/2015 11:09:27 PM • 2008 Dodge... • Answered on Apr 19, 2015
0helpful
1answer

How to hook up a brake controller for towing

Attached below is diagram illustrating how to hardwire a brake controller into any vehicle. Your Durango should have a blue controller plug that is installed at the factory and that is located under the dash to the left of the steering column. If you have this plug, you would be able to purchase a harness that will mate with that plug and would take a lot of the guess work out. 4f1c91b.jpg
4/10/2015 1:05:55 AM • 2008 Dodge... • Answered on Apr 10, 2015
0helpful
1answer

08 dodge Durango replaced motor but tranny bolts won't screw in but four turns want could I do? Need help asap

Does the bell housing rest tight up against the back of the motor? If so, and the bolts won't go in but four turns, you have real problems. You also haven't said whether or not you replaced the motor with one of the same size and from the same model year. This has been know to have issues. If the bell housing is NOT tight up against the motor then, if it is an auto transmission you may not have the torque converter seated properly on the input shaft. If it is a manual trans, you may not have the input shaft splines lined up to the clutch disc correctly.
3/21/2015 12:49:20 AM • 2008 Dodge... • Answered on Mar 21, 2015
0helpful
1answer

Where is the button to put a 2008 dodge Durango in 4 wheel drive?

Read your owners manual
10/5/2014 3:50:35 AM • 2008 Dodge... • Answered on Oct 05, 2014
0helpful
1answer

Dodge Durango 4 wheel drive won't engage

Four wheel drive vehicles with inside the vehicle four wheel select buttons etc. have plug in four wheel drive control modules, you need to find where yours is located some are under the dash, behind the glove department. others are under the battery box..it can be a DIY job. they are somewhat expensive $ 200 or so..and come in so many modeks..you need to find the exact number of your modual even though you give your vehicle model they vary greatly due to vehicle options...without it your four wheel will not engage....garage cost will be approx $ 400++ so try and find it..Good luck..
10/5/2014 3:34:55 AM • 2008 Dodge... • Answered on Oct 05, 2014
0helpful
1answer

Cigar lighter fuse

in the fuse box on drivers side of dash
8/9/2014 9:54:19 PM • 2008 Dodge... • Answered on Aug 09, 2014
0helpful
1answer

I was driving on the interstate doing 72mph when all of a sudden it was like someone slammed the shifter into neutral. I lost all forward gears and reverse the only thing I have is park. There were no

Dodge had a lot of problems with the drive train. The torch converter has two gears in it has given out. replace it. You may have to change your screen and fluid also.
12/2/2013 3:41:20 AM • 2008 Dodge... • Answered on Dec 02, 2013
0helpful
1answer

Transmission stopped shifting

it could be in limp mode. needs to be scanned for codes. if it feels like its takin off in second gear that is limp mode.
11/29/2013 4:14:33 AM • 2008 Dodge... • Answered on Nov 29, 2013
manual
0helpful
1answer

2008 durango driver's seat automatic seat adjustment not working

most likely bad connection remove it and clean the contacts it should work then
3/17/2013 6:39:47 PM • 2008 Dodge... • Answered on Mar 17, 2013
Not finding what you are looking for?
Cars & Trucks Logo

83 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2001 Dodge Durango
2001 Dodge Durango

1,378 Questions

2002 Dodge Durango
2002 Dodge Durango

886 Questions

2004 Dodge Durango
2004 Dodge Durango

1,005 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Durango Dodge

  • Durango Dodge

Most Popular Question

key fob just died put in new battery

  • Cars & Trucks
Loading...