20 Most Recent
2008 BMW 5 Series Questions & Answers
My 2008 BMW 5 Series
take it to an accredited auto transmission specialist shop and have the fault codes read indicates that the problem could be in the TCM or VSS sensor
My question what is the cause of central locking not function in bmw car x5
It's usually a fuse either inside the cabin of your car or the one under the hood or possibly the relay in the fuse box under the hood..The fuse for your central locking may be labeled but the relays usually are not and you normally have to either test them one by one or use a volt meter on them to see which one is faulty and that may be your culprit...
How to replace the stater motor 2008 528 i
The very first thing you absolutely must do is disconnect the positive battery cable and wrap it with an old sock or something similar. I have had them creep back onto the battery while I was working and it's quite a surprise, believe this. Remove the electrical wire from the starter first, then the mounting bolts, not, the other way around. It is a Chinese puzzle to get it out but you will figure it out. Good luck, Dana.
Engine failsafe mode
I suggest scanned the computer car in order to know what specific fault code is stored there.
Not finding what you are looking for?