20 Most Recent
2007 Dodge Charger Daytona R/T Sedan Questions & Answers
Car wont stay started have changed my crankshift position sensor
How do you know it needed a crank sensor ? Does it have spark , did you pull a coil if it has coil on plug ignition or plug wire an see if it has spark ? If there is spark you do not need a crank sensor ! Try spraying carburetor cleaner in the intake an see if it fires , if it does you have a fuel delivery problem ! An when you change a crank sensor you need to have a crank relearn done with a scan tool. not a code reader !
Charger 2007 i changed FCM then dashboard lights flashed
This could be something as simple as a ground not making good enough connection. The fact that it worked for an hour makes me think it could be a simple fix. First check all fuses to make sure they are good. Then, scan the system for any fault codes at all. If you can provide some codes or a little more information I would like to assist you further. Fianlly, focus on the fuse box under the hood, its called a TIPM (totally integrated power module) this is like the brain of the vehicle so it would be a very good idea to start your troubleshooting there. Good luck!
Regards,
-Tim
Power loss and knocking in engine
ur engine must be reboured & by replacing piston rings the leakage
of oil is prevented
then u will get the original power $ good acceleration
Not finding what you are looking for?