20 Most Recent 2007 Nissan 350Z Questions & Answers


probably bent the bell housing around the flywheel . near the starter and possibly broke the starter also .

2007 Nissan 350Z | Answered on Aug 06, 2016


Hi QQ, a 12 volt circuit light will be what's needed, turn the drive lights on and put the circuit light over the fuse box and work from there. Cheers Greg.

2007 Nissan 350Z | Answered on Feb 02, 2015


Hi Brittany, if you still need help get back to me. Stay well Greg.

2007 Nissan 350Z | Answered on Feb 02, 2015


I would have the shock absorbers checked. Sounds like they could be shot.

2007 Nissan 350Z | Answered on Feb 02, 2015


Stop using it --- like ALL Vehicle problems
& have a shop or dealer diagnose the issue

2007 Nissan 350Z | Answered on Jul 14, 2014


if not you should be able to buy the wiring kit for it to do so , look on ebay that is the best place to find one and also the best price , good luck

2007 Nissan 350Z | Answered on Jun 29, 2014


oversize tires leads to slip only put on company reccomended tire size

2007 Nissan 350Z | Answered on Jun 28, 2014


abs problem will be a wheel sensor. if speedo working its not the pass side one. now for the lambda sensor. if you are traveling at 70 mph for 250 miles at a time this will over heat the sensor over time. as its a 2007 and normal running over time to replace them is 10 years. most that do over 500 miles a day would need to change them with in 2 to 3 years.

2007 Nissan 350Z | Answered on Mar 12, 2014


This is always best left to a professional trim shop technician or you will ruin a perfectly good new top.

2007 Nissan 350Z | Answered on Aug 31, 2012


MY 350Z ROADSTER HAD THE SAME PROBLEM CLOSED TOP ON SLANT CAUSING PROBLEMS W LATCH MECHANISM. IN THE THE RIGHTMOST LATCH IS A SWITCH WHICH NEEDS TO BE FULLY DEPRESSED BY THE END OF THE HOOK IF ITS NOT EVEN THOUGH EVERYTHING IS LOCKED LIGHT WILL STAY ON. IN MY CASE THE RUBBER COATING OVER HOOK HAD COME OFF. SOLUTION WAS TO INSTALL RUBBER SLEAVE OVER HOOK AND THE SWITCH WAS DEPRESSED AND LIGHT WOULD GO OFF.SWITCH OPERATES LIKE DOOR AJAR SWITCH. ALSO MY TOP HEAD TO BE SLIGHTLY REALIGNED TO CENTER LATCHES IN SLOT. ON THE INSIDE OF THE TOP WITH THE TOP HALF RAISED YOU CAN SEE TWO STOP ADJUSTMENTS ONE ON THE LEFT AND ONE ON THE RIGHT. THEY HAVE A ROUND RUBBER HEAD ABOUT AN INCH WIDE WITH AN ALLEN SCREW IN MIDDLE TURNING SCREW DETERMINES HOW FAR FORWARD O BACK THE TOP STOPS. AFTER ADJUSTING THE SCREW IS LOCKED INTO PLACE BY TIGHTENING NUT A BASE. MAKE SMALL ADJUSTMENTS TILL YOU GET THE HOOKS CENTERED. HOPES THIS HELPS SOMEONE.

2007 Nissan 350Z | Answered on Apr 29, 2012

Not finding what you are looking for?
2007 Nissan 350Z Logo

Popular Tags

63 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

350Z Nissan

  • 350Z Nissan

Most Popular Question

2007 350z convertible top light stays

  • Cars & Trucks
Loading...