20 Most Recent 2007 Mercedes-Benz ML320 CDI - Page 2 Questions & Answers

if you pull radio out write down serial # off radio. once you got # call dealer and they shold be able to give you radio #. if they don't I could get it for you. I work at an independent shop in MA and we work on merc bmw porsche land rover volvo . My e-mail is [email protected]

It is apparent that the wire between the current sensor that the computer monitors and the left brake light socket is open. Thus the computer knows the brake light is not working because it is not drawing current. If you have a wiring diagram, you can probably find the broken wire or bad connection. This may take some time. To get the left brake light working, you can jumper the left brake light socket to the right brake light socket. Warning, this may cause the computer to register the extra current on the right side as a short circuit and shut both off. If that happens you will have to forgo the left brake light until you get the open circuit corrected.

The belt is tensioned with a spring loaded pulley on an arm. To ID this part start the engine and watch the belt go around the pulleys, when you gun the engine the belt tensioner pulley will jitter to adjust the slack.

I m sorry but I don't thing I have the knowledge to solve this problem

U r dumb