Top 10 2007 Chrysler Sebring Sedan Questions & Answers

2007 Chrysler Sebring 4-Cyl. 2.4 L
Automotive V-Ribbed Belt (Standard)


2007 Chrysler Sebring V-6 2.7 L
Automotive V-Ribbed Belt (Standard)



2007 Chrysler Sebring V-6 3.5 L
Automotive V-Ribbed Belt (Standard)



I hope you with this. Good luck (remember rated this help)..

Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.

I have an 08 Sebring and mine has been having the etc light come on and the car will stall..with little to no notice. It's at the dealer right now and they can't figure out what is causing this because the light doesn't stay on once you turn off the car and restart it. It's kind of relieving to me that someone else is having this problem. Hopefully Chrysler can figure out what the deal is with this!!

Had this happen to me yesterday.  Remove the liner in the cup holder.  There is a hole that you can stick your finger in to push the gear release lever forward.  If that does not work, pull up the chrome bezel around the gear shift.  there is a pink piece of plastic attached to a spring, push that down and towards the rear of the car and you should be able to shift freely until you put it in park again.  Make sure the car is running and your foot is on the brake while trying either solution.

Chrysler Sebring 2.7

Hi there:
Check in this previous LINK.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Hi there:
Model SEBRING
Engine L4 2.4L 2360cc 144ci GAS FI N K



Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Here is the definition.

P2017 CHRYSLER - Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1

Possible causes - -
- Manifold flow valve harness is open or shorted
- Manifold flow valve circuit poor electrical connection
- Faulty Manifold flow valve
- Faulty Powertrain Control Module (PCM)

You'll need someone with a shop manual to get the testing procedures.

2011 Chrysler 200,2.4L

Testing the ABS sensors on 2008 Chrysler Town and Country

Code C101F indicates that there is a failure or fault with the ABS speed sensor or with the sensor wiring/plug. The above video explains about the sensor ( this is general info about the sensor)...