20 Most Recent 2006 Peugeot 307 CC - Page 8 Questions & Answers

bad o2 sensor

open the boot lid and gently run a hose on the back glass(do not allow any water to flow over the boot seal) Have some one do this while you check around the window drain area inside the boot and up in the mudguard areas checking for rust holes or cracks. Use talk powder in these areas to detect water trickles or feel with you fingers for wet areas . Check the steel lip that the seal is fixed on for rusted areas underneath it as water will get in these holes.

Remove the door panels and look for mounting screws inside the door.

What is that? Never heard of such term.

do u have enough oil in it ,is you light giving a false reading get a manual oil pressure gauge and make sure or your oil pump can be going bad , your main bearing are going bad , be more specific here ,

By bump start do you mean you can have it pushed or push it, jump in and depress the clutch and get it started using the momentum of the vehicle to turn the crank? I usually call that a jump start but I think I have heard it called bump start (from having it bumped/pushed by another vehicle I think). Anyway if that is the case you need a new starter. If not post back and I will do what I can to help.

Check the wiring connectors for the lights to see if they are clean and no green inside, if so spray with wd40 and reconnect.

Have a load test done on the battery . Check battery posts and terminals are shiny clean and tight.. Check the alternator drive belt condition and tension because if it drives both the alternator and the power steering pump it indicates a belt problem.

horn and washers not working

Well white smoke comes from water not oil

There are many available on eBay. If you do not wish to fit it, and mechanic should do so cheaply http://www.ebay.com.au/itm/like/300923843627?limghlpsr=true&lpid=104