2005 Nissan Titan Crew - Answered Questions & Fixed issues

if key not opening than you have an internal problem which you need to open door and remove door panel go around and enter vehicle from passenger side and open door behind door panel are rods with clips that operate release their are also spring on latch itself but usually the clip breaks or becomes disconnected most auto stores carry a replacement clip

best way is to have a locksmith come to your place and remove/replace the barrel of the switch Take it to a shop they will charge the same and probably will get in a locksmith to do the job.

Are you saying it cranks good but won't start or won't crank? Any codes? If it cranks most likely the ECM relay in the IPDM.

Here's a link to your coolant temp. sensor,you may have a coolant temp. sender too,they are by each other, Duralast Coolant Temperature Sensor SU4072 2005 Nissan Datsun Titan 2WD... Here's a part list. Part Detail There's no way to test it,just have to replace and see if it solves the problem.I have a 85 nissan 720,mine has both sensor and sender,the sender operates the gauge on dash,the sensor sends signal to the brain.

proberly needs regassing as are belt driven if this is all ok does the heater/a.c switch work?

First check your fuse.

Click here Sally to see oil pressure switch guide.

cables through firewalls are normally surrounded by a stiff rubber grommet that is either just pressed in place or retained by a metal surround push out/in and pull cable through. make sure you replace it to around the same position before refitting the cable

1. check n replace p/w crane cable assembly.2.p/w motor switch,fuses etc

Hello .. As strange as this may sound ,, your brake lights are (most of the time) tied into your signal light switch . Try plugging in on you know is good before buying a new one . It stops your front signal lights from coming on when you apply the brakes since your signal lights usually run on the same wire as the brake lights ....

Hello. Either the brake light switch and/or the vacuum brake booster is at fault. Good luck and keep me informed; if you want to.

Same as the 5.6? https://enginepartsdiagram.com/2003-2020-nissan-titan-timing-marks-diagram-5-6-l-vk56de-engine/ Videos as well https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk03sK6Q-p7MF-IwNHNQKd5ysu57-kQ%3A1607198768570&ei=MOjLX46wIoTM_Aa74ruICA&q=Nissan+Titan+XD+5.0+timing+marks ..

there's a website reliable-store all heavy equipment repair issues servicing, loading, wiring, engine problems everything is covered here its a must try

You need a Haynes repair manual.

Google may have a video for that

maybe break unit damged , please check dtc

If it is where I think it is, it may require removing the fender....

I suggest you get one of those manuals people get nowadays to do it yourself.. My nephew use it to repair my car and it's totally repaired now. he bought it from. reliable-store or try manualslife also get instant help suggestions etc from reliable-store otherwise both are really good for this

Could be the heater core is bad, or the climate control switches

pump is bypassing replace it