20 Most Recent 2010 Nissan Altima 2.5 Questions & Answers

Question edited for clarity. Question moved to model category. Help in the link. Faulty re-learn? https://www.google.com/search?q=2010+Nissan+Altima+Code+P0507 ..

I have read the owner's manual and find no mention of any warning light that says VRO, are you sure of this, check again. Here is a link to the woner's manual, check for yopurself. http://cdn.dealereprocess.com/cdn/servicemanuals/nissan/2010-altima.pdf

Recommend repair manual from your favorite auto parts store.

have you checked the seal? it may need replacing.

Never been on anything but a Ford & Mazda If you were not in an accident,why ask !!

trip B is just a secondary trip gauge/ counter. Same as you would use "A" to count, you can use "B" to say, split the distance or count from another point. A. might be at 100 miles (perhaps you use that for gas check range) B. might be your trip to a destination and you want to see how far that is without resetting your gas counter on A.

couple trouble shooting steps: 1. carefully stick a pin in the nozzle(s) coming out of the hood to be sure it's not caked with gunk and debris. 2. (can you hear the motor when you hit the button), do the nozzle(s) lake when you try to use it (from the hood).. as if it's trying? 3. have you unplugged the hose(s) to make sure they are not clogged with debris (top to bottom) or leaking in between (somewhere down the hose). 4. it's rarely the motor and generally a clogged up system from lack of use. good luck

you may have a key inside the car or you are leaving something on and gettin out with key and or the engine running ther is no diagnostic you could really run it needs to be checked while the problem is ocurring

Call dealer to get radio code or just drive their.

sounds like a mouse attack to me. mice get into the heater vents and blower motor cage and make nests. those can throw your blower motor out of balance, thus resulting in the noise and then the motor just gets jammed and stops operation. but it could be just the blower motor failure it self. have it checked.

if the radio and DVD work, and only one channel comes on when you plug in your iPhone (i assume used for music), you may have a mono plug (the tip looks like two pieces of metal, separated by plastic), going into a "stereo" jack (the stereo plug going into this should look like three pieces of metal, separated by two plastic). for the earpiece with mike, used on a cell, that plug would look like four pieces of metal.

Its the same as trip A but just another one. You can use trip A to see how far you get from a tank of gas and use trip B to measure each little trip.

In a Nissan Altima, code P1574 typically indicates an issue with the ASCD (Automatic Speed Control Device) speed sensor A. This sensor is responsible for detecting the vehicle's speed and providing the necessary information for the ASCD system to function properly. When this code appears, it usually means that there is a problem with the speed sensor itself, the wiring connected to it, or possibly a malfunction in the ASCD control unit. It can lead to issues such as the cruise control not working, the vehicle not maintaining a set speed, or other related problems. To diagnose and fix this issue, you may need to perform the following steps: 1. Check the wiring and connections: Inspect the wiring harness connected to the ASCD speed sensor A for any signs of damage, corrosion, or loose connections. Make sure all connections are secure and free of debris. 2. Test the sensor: The ASCD speed sensor A itself may be faulty and need to be tested. You can use a multimeter to check the sensor's resistance and compare it to the manufacturer's specifications. 3. Check the ASCD control unit: If the sensor and wiring appear to be in good condition, the issue may lie with the ASCD control unit. Testing and potentially replacing this unit might be necessary. 4. Clear the trouble code: Once you've identified and resolved the underlying issue, you can clear the trouble code from the vehicle's system using an OBD-II scanner. This will reset the system and allow you to see if the problem persists. If you are not comfortable performing these steps yourself, it's recommended to consult with a qualified mechanic or dealership with experience in diagnosing and repairing ASCD-related issues in Nissan vehicles. They can provide a more accurate diagnosis and solution to ensure your Nissan Altima's ASCD system operates correctly.

ok now i had a problem like this before and i disconnect the battery terminal for a few seconds then replace it then close all doors trunk,and hood then lock and unlock the car with the key or with the remote if it have one, and it solve my problem try it and i hope it work for you it's not my thing but i hope it help you all the same

Question edited for clarity. Check out the videos and see if they help https://www.google.com/search?q=2020+Nissan+Altima+replace+dome+light+unit ..

There is a strange procedure for this! https://www.palmspringsnissan.com/blog/how-to-completely-turn-off-the-headlights-on-my-nissan/ https://www.google.com/search?q=1997+Nissan+Altima+GXE.+The+Daytime+Running+Lights+won%60t+turn+off ..

i have a vics dm306a pw 706 in my car i want a english manual for it everything is in japanese