20 Most Recent 2006 Nissan 350Z Coupe - Page 4 Questions & Answers

Check local glass companies and or call your insurance company. They usually have a preferred vendor

Take it to a garage and pay the $24 to have them install it, they are responsible for the radio codes and any other problem that can occure when changing a battery in the newer cars.

yes sorry to say most models u do but need to no more info

Uhhhhhhhh, what is your question?

use the dipstick(you do not need to do anything else)....do not overfill.....

check the fuse.

there are 100's of poss trouble codes that keep the check engine light on, so without the test results it is hard to say what the dealer will find.

the rubber gasket surrounding the unit must be wornout replace it or if minour tear stick it with jel glue for rubber.

consult your owners manual

flicker on dip but ok on main beam??relay fault

Honestly, if you're really debating a Skyline purchase, you need to learn to wrench on the car confidently, as they weren't imported to the US until the current R35 model (an early '09). For this reason, you may have serious trouble finding a mechanic willing to take on repairs of the car, due to the lack of documentation for servicing and the scarcity of parts (which, when you do find them, are astronomically priced).

I'm trying to give you a real-world heads-up here, not to be condescending (that's not my intention at all). Keep in mind that the gray-market Skylines imported by RB Motoring and Motorex back near the turn of the decade were largely snapped up by tuner enthusiasts, who probably beat the snot out of them. You may be in for unforeseen repairs and servicing, and the two companies I mentioned are among the few in the US with any real-world experience working on the cars.

As for what the servicing means, it could mean a lot. Technically that could mean the owner changed the oil, coolant, and power steering fluid, and called it a day. Or it could mean that the engine was torn down completely and rebuilt from the ground-up. You'd definitely want as much documentation as possible before buying a car that was never even officially sold in the US.

I need code for this serial, same radio, Thanks PP2787HB 0091600

The firing order for the Nissan Elgrand equipped with the VG33E engine (1999 model) is 1-3-4-2, starting from the front. Nissan 3.3L (199 cu in) firing order - diagram & guide ' REREV

It could be numerous problems - consult a reputable shop - you need someone that knows what they are talking about to physically look at the car to solve the problem - will save you a lot of time and expense. ????

Probably the fan got blocked with some debris and caused it to draw too much power, that caused the fan controller to fail. Or, the fan controller has failed, has a bad connection etc. Check the cabin filter if it has one, for a blockage.

Hello, Malcolm. It seems like you are facing an issue with the alarm system of your Nissan Primera P12 from 2002. Based on the symptoms you've described, it does sound like there might be a fault with the alarm system or the central locking mechanism. Given that you have already tried a few troubleshooting steps such as disconnecting the battery and replacing the micro switches, it might be a good idea to further investigate the alarm system itself. Since the hazard lights are flashing without any audible alarm sound and the central locking is behaving inconsistently, there could be a fault in the alarm control unit or wiring. One possible cause could be a faulty alarm module or a loose connection in the wiring harness related to the alarm system. It's also worth checking the condition of the alarm siren to ensure it is functioning properly. Considering that the issue seems to have improved after disconnecting and reconnecting the battery, it's possible that there is an intermittent fault related to the power supply or a reset of the alarm system. If the problem persists, it might be best to consult with a professional mechanic or an auto electrician who can perform a more in-depth diagnostic test on the alarm system to pinpoint the exact cause of the issue. In the meantime, if you experience the hazard lights flashing again, try to document when and under what circumstances it occurs. This information can be helpful in diagnosing the problem more accurately. I hope this information helps, and I wish you the best of luck in resolving the issue with your Nissan Primera P12. Feel free to reach out if you need further assistance or have any more questions.

To remove the starter motor on a 1994 Nissan Bluebird SSS 2 litre ATTESA-U13 engine (AWD), follow these steps: 1. Disconnect the negative terminal of the battery to prevent any electrical accidents. 2. Locate the starter motor, which is typically located near the transmission bell housing on the engine block. 3. Remove any heat shields or other components that may obstruct access to the starter motor. 4. Disconnect the electrical connections to the starter motor, including the wiring harness and solenoid. 5. Remove the mounting bolts that secure the starter motor to the engine block. 6. Carefully slide the starter motor out of its mounting position and set it aside. 7. Install the new starter motor by reversing the removal steps. As for finding a repair manual for your Nissan Bluebird SSS, you can try searching online for a digital version that you can download, or you can purchase a physical copy from a reputable auto parts store or online retailer. Additionally, you may also be able to find helpful information and step-by-step guides on online forums and websites dedicated to Nissan vehicles.

Has the Throttle body been removed and cleaned thoroughly both sides? Was a Throttle body relearn done afterwards. https://www.google.com/search?q=2018+Nissan+NP200+8v.+Throttle+body+problem Ideally you need an auto electrician to check for Diagnostic Trouble Codes and do a full system scan with a pro grade scan tool computer. It can also do the relearn and check the IAC. https://www.google.com/search?q=auto+electrician+near+me ....

Question edited and turned around for clarity. Not enough coolant in the heater core. Have a read and follow these instructions carefully. https://www.fixya.com/support/r29872074-vehicle_cooling_system_no_heat They do have some 'history'. https://www.google.com/search?q=1996+Nissan+Largo+no+heat ..