20 Most Recent 2005 Mitsubishi Endeavor XLS - Page 9 Questions & Answers

You have a module issue, but which one, Throttle Position sensor, Throttle body, MAF, Crankshaft, or Camshaft, or a bad connection. An auto electrician with a pro grade scan tool can diagnose. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

can be something other than switch -----------http://mmc-manuals.ru/manuals/pajero_sport_iii/online/Service_Manual/2017/35/html/M135202550030702ENG.HTM

Question edited for clarity, turned around, add magic word. In the link https://www.google.com/search?q=Mitsubishi+M3+Torque+specs+for+L3G14+head ..

Well, you need 3 things for an engine to run; air, fuel and spark. Air from the air ducting through the air filter, the fuel from the pump usually in tank to fuel filters {pressurized} into the injectors for fuel. Spark is a bit trickier; you have a cam sensor, crank sensor, coil packs, spark plugs. There are more components in each of these 3 classes so unless you are familiar; it's best to take it to a mechanic.

250nm

What's code 19 Line PRS.SHT on lancer 2005 ?

Haynesmanual at partstore

Yes me! https://www.google.com/search?q=Mitsubishi+FUSO+8M20+CYLINDER+HEAD+bolt+TORQUE And Videos as well ..

No they are crooks! The genuine part from Mitsubishi is $120 and it looks like you could do it yourself. Where is the transmission fluid pressure sensor? The pump pressure switch is located on the transmission housing next to the pump. The switch lets the computer know what the pressure is coming from the pump when the engine is running. The servo pressure switch is located on the housing near a band or servo in the transmission. Oct 11, 2016 Videos https://www.google.com/search?q=2016+mitsubishi+outlander+transmission+fluid+pressure+sensor+location ..

You can't disable Car Alarms and Engine Immobilizers. They are there SPECIFICALLY to stop what you are trying to do. There are 2 computers ECM/BCM, an Anti Theft module and numerous sensors there to stop you. You have to fix the problem, not find away around it. https://www.fixya.com/cars/r26142776-want_bypass_vehicle_security_system and https://www.google.com/search?q=mobile+auto+electrician+near+me or https://www.google.com/search?q=mobile+auto+locksmith+near+me depending on what your issue is?

There isn't one. Brake lights are a function of the BCM.

One possible cause is a faulty throttle body valve, which can limit power by not opening fully. Another possible cause could be a dirty or damaged mass airflow sensor, which can cause a lean air-fuel mixture and lead to acceleration problems . A clogged fuel filter or air filter could also be the culprit . 8 Reasons Your Car Won't Accelerate And How To Fix It (mechanicbase.com) It's best to have a professional mechanic diagnose the problem. However, if you want to try diagnosing the issue yourself, you can start by checking the gas cap and reading the fault codes by connecting a diagnostic scanner to the diagnostic port under the dashboard . If you're still having trouble, you can try disconnecting the negative cable to your battery for about 30 seconds and then reattaching it . Troubleshooting Mitsubishi Check Engine Light On (youcanic.com) SOLVED: No acceleration when car in Drive - 2002-2006 Nissan Altima - iFixit

There are only 3 ways to get the code. https://www.fixya.com/support/r29874205-need_vehicle_radio_code ..

The glow plug relay is located in the engine compartment, on the left side, just in fron of the battery, and in the battery box.

You will need an owners/service manual to sort that out. https://www.manualslib.com/manual/1243816/Mitsubishi-Fg15n.html https://www.warehouseiq.com/mitsubishi-fg15-forklift-repair-manual/ https://issuu.com/1637912/docs/mitsubishi_fg15_forklift_trucks_ser_8680059c1de39c Hopefully, one of those fits what you need.

Hi Andy- I found this youtube video. https://www.youtube.com/watch?v=jnk_ZaeDrS4 Hope this helps.

Low brake fluid

These may be few possible reasons why the check engine light won't go away after replacing the O2 sensor in your 2000 Mitsubishi Eclipse V6

·The wrong O2 sensor was replaced or the O2 sensor is properly connected to the wiring harness(any signs of damage or corrosion). ·Sometimes, issues with the engine, such as misfires, vacuum leaks, or problems with the fuel system, can trigger the O2 sensor to report a problem. Ensure your engine is running smoothly and there are no other issues that could affect air/fuel ratios. ·The new O2 sensor is defective. If the O2 sensor is working properly, then the check engine light could be due to another problem with the exhaust system, such as a leak or a problem with the catalytic converter. ·Problem with the wiring to the O2 sensor. If the wiring to the O2 sensor is damaged or corroded, it can cause the sensor to malfunction and trigger the check engine light. To diagnose the exact cause of the problem, you will need to have the car scanned by a qualified mechanic. The mechanic will be able to read the trouble codes from the computer and use that information to pinpoint the problem.

Manuals https://truckmanualshub.com/mitsubishi-truck-service-repair-manuals-pdf/ Already answered on Fixya https://www.google.com/search?q=4dr7+mitsubishi+canter+valve+clearance ..