didnt change them 1 by one, you bad boy.
id get the real engine name and google that or buy the FSM book.
at FIAT.
1.2 F.I.R.E engine.
comes in 2 favors
- 8v SMPI VVT (2007 - current)
- 16v SMPI (1998 - 2009)
most non boxer engines, are 1,3,4,2 (but this is pcm job not you )
google shows
IT'S
WASTED SPARK SYSTEM !
google hit #1
It's cast into the cylinder head. Look across from the passenger side of the car- you'll see 2314 just above the coils.
sounds like this engine is with a COIL pack, You never said.
and with a twin pack , all 4 bangers are wasted spark.
so 2nd 3 fire on one coil (in series) and 1and 4 fire in tandom.
but the PCM sets order. not you,
it only needs to have to pack wired right.
and is clearly marked on most better made coil packs
did you look first.?
---------------------------------------------------------------------------
one more google poster , no FSM. shows
coil towards the front of the car is cylinder 2 and 3
coil towards the back of the car cylinder 1 and 4
as shown below
make sure you have the plugs to the coils the right way round thou i
4 ----[o]4
1 ----------------[o]1
2 ------------[o]2
3 --------[o]3
-----------------------------------------------------------------
me.....
when the PCM fires coil 1/4 , it better be wired to 1 and4 or
it will not run. (ir shakes like a wet dog)
simple as can be.
yes, the front cylinder is #1
now where is front. you say?, that be, on the crank pulley end.
not the clutch.side.
if still confused a drawing is easy to make.
1sparkfront, to 1 coil
2 spark to coil 2
3 spark to coil 3
4 spark to coil 4. rear cylinder is 4.
1,2,3,4 front to rear.
