20 Most Recent 2011 Dodge Caliber Mainstreet Questions & Answers

Question edited for clarity. Question moved to model category. Recalibrate the display. https://www.google.com/search?q=2011+dodge+caliber+calibrate+radio+touch+screen ..

Question edited to add maker. Question moved to model category. There are ideas in the link https://www.google.com/search?q=2011+Dodge+Caliber.+No+audio+for+car+radio ..

I, feel sorry for you, after reading your problem, but don't worry you visit the Reliable-Store they will help you for sure. Best Manuals

Hold the switch in the down position. When the window reaches the open full travel position retain the button for an additional 3 seconds for the circuit to relearn the down position.

If the window goes down but not up, suspect a problem with the switch/wiring. The motor will not be the problem

It's time to replace the radio, the dealer has an exchange program, where you can get a rebuilt unit for about half price, when you trade in you old one.

unscrew it

check for overheating problems check for water in the radiator (not the reservoir) sound like the cap is blowing off

Have your wheel bearings checked, when a wheel bearing is going bad it hums louder as you accelerate, when you stop or slow down the sound stops. A bad bearing does that, it over heats due to it not having enough grease on the bearing and will hum as you drive and get louder as you accelerate.

THE HEATER CORE IS LEAKING

front facia has to be removed intence job

Sounds like the drain for the HVAC vent is not working, or the drain for the windshield. Could be a bad weld in one of the seams around the front door.Since it should still be under factory warranty I would have the dealer take a look.

Sounds like your heater core is leaking. Or the hoses connected to it.

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.

To confirm the problem, the basic troubleshooting is required.

Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help. Thanks.

Question re-written for clarity. Question moved to model category. There aren't any. The headlights are a function of the IPM (integrated power module). Fuse 36 is the control according to this. Headlamp / Washer Control / Smart Glass

What's the 2007 Dodge Caliber headlight relay location?

Vehicle History https://www.vehiclehistory.com > questions > whats-th... Jul 16, 2020 - The head lamps are controlled by a fuse in the engine bay. To locate the integrated power module, open the hood and look on the driver's side of ... 2 answers · Top answer: The 2007 Dodge Caliber is noted for driver's side low beam headlights that f

Dodge Caliber (2006-2012) fuses

Fuse Box Diagrams https://fuse-box.info > dodge > dodge-caliber-2006-2... Fuse box diagram (location and assignment of electrical fuses) for Dodge Caliber (2006, 2007, 2008, 2009, 2010, 2011, 2012).

Fuses and relay Dodge Caliber - Fuse box diagram

fusesdiagram.com https://fusesdiagram.com > dodge > fuses-and-relay-d... Locate fuse and relay. Fuse box diagram. Identifying and legend fuse box Dodge Caliber 2007-2012. ..