20 Most Recent 2007 Chrysler 300 Touring Questions & Answers

Scan the PCM for codes. Find out if your dealing with an emissions problem, Transmission problem or a brake lockup situation. How are the condition of the brakes N calipers?

Sounds like your turn signal/wiper switch on the side of your steering column is having problems. Like you said, it could very well be your computer. There is no way to reset the computer without the right software tools. I would try wiggling the switch to see if you can get it to work momentarily, if they work for a split second, then you know your switch is bad.

Is the window motor getting power at the motor? Is the ground OK?

I have a chrysler 300 m 2002 and i was wondering what the torque is on the inner and otter tie rods

What are the codes?

un hook your battery to reset the computer , if it persits you may have to change the esp sensor keep in mind once you disconnect the battery it will clear your error codes and it can not be read later.

Check your Mass airflow meter. You should be able to clean it w/carb cleaner. Here is a video that may help: https://www.youtube.com/watch?v=xQGSkWEC_u4

Water out the exhaust? Might be headgasket blown. Verify compression. Might need gasket replaced. If lucky fan relay shot.

Fuses 19, 22, and 24 in the fuse box under the hood are involved in running the fans

Fuses 39 and 43 in the fuse block in the trunk