20 Most Recent 2006 Chevrolet Uplander LT Questions & Answers

Have someone turn the ignition on and you listen to verify that the fuel pump did start up.It's inside the gas tank so you have to be quite close to hear it.A sure way to verify if it's the fuel pump is to squirt some quick start fluid into the system through the intake and if turns over you need a fuel pump

2006 Chevrolet... | Answered on Sep 21, 2018

Here's a link Dave on your starter removal guide. Repair Guides Starting System Starter AutoZone com

2006 Chevrolet... | Answered on Jul 18, 2015

No it will not

Just love to throw parts at things --apparently

2006 Chevrolet... | Answered on Dec 05, 2014

Hi there,sometimes changing the bulb or checking the fuse is not sufficient, it could be from many reason like circuit interruption ,dirty cables, end connection and more....
the only thing that you can do now is to check the connection that brings at the bulbs, unscrew it ,clean it, and if necessary cut the edge to a better connection! I suggest also to recheck the fuses with a proper electrical circuit that shows you the exact fuse's position!
other than this you should bring the car to an electrical store!
hope you can fix your problem!
From Cris,the best on Fixya!

2006 Chevrolet... | Answered on Jul 29, 2014

This is a bad earth connection . Run a new cable from the battery to the engine or transmission , then run a cable from the engine or transmission to the body . No more trouble.

2006 Chevrolet... | Answered on Jun 16, 2014

check fob key battery (flat )

2006 Chevrolet... | Answered on Dec 28, 2013

take the key and the car to a dealer service centre and they will program the key for you to the immobiliser in the car.

2006 Chevrolet... | Answered on Dec 28, 2013

ummm use a key...if that doesn't work call AAA

2006 Chevrolet... | Answered on May 27, 2013

What about this? Send us details.

2006 Chevrolet... | Answered on Feb 28, 2013

Removal of the arm screws will loosen the base and it can be lifted out from the groove.

2006 Chevrolet... | Answered on Jul 04, 2012

It can be issue with brake system alignment.Get the brake assembly checked.Something is not right and out of its way causing these problem.----------
Click the help links mentioned below and go with the troubleshooting solutions to confirm what is exactly faulty in your case:-----Click the link :----Car shakes like the wheels are going to fall off http://technoanswers.blogspot.com/2012/11/car-shakes-like-wheels-are-going-to.html


It can be issue with master cylinder or the problem is there is still some air there in the system,that has to be bleed.Or else the parts replaced are not aligned properly/.I suggest everything back.

There are few help links mentioned below to troubleshoot the issue.

Click the link below and follow its procedure:-----

All types of brake problems and repairs http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

Brake Fade Issue? http://whoisbyme.blogspot.in/2012/07/brake-fade-issue.html

Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

Car Brake lines have no pressure? http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html

Car Brakes Dragging? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-dragging.html

Car Brakes grabbing? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-grabbing.html

Car Brakes Making Noise? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

Car Brakes Pulling? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-pulling.html

Pulsating Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/pulsating-brake-pedal.html

Spongy brake pedal? http://repairhelpcenter.blogspot.com/2011/12/spongy-brake-pedal.html

Hard Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/hard-brake-pedal.html

Fading Sinking Brake pedal?


Feels Like Brake pedal Pulsating http://repairhelpcenter.blogspot.in/2012/06/feels-like-brake-pedal-pulsating.html
============These will help.Thanks.

Chevrolet... | Answered on Sep 17, 2019

There could be something in the oil that is blocking oil flow in the galleries. Have you checked the condition of the oil for any foreign substances? It could also have something to do with the oil pump operation, but I think it unlikely.

Chevrolet... | Answered on Mar 21, 2019

Not finding what you are looking for?
2006 Chevrolet Uplander LT Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Uplander Chevrolet

  • Uplander Chevrolet

Most Popular Question

chevy uplander will not start

  • Cars & Trucks