20 Most Recent 1977 Chevrolet Corvette - Page 8 Questions & Answers

0answers

Error code 39

Be the first to answer 1/21/2014 3:35:53 AM • Chevrolet... • Posted on Jan 21, 2014Be the first to answer
0answers
0helpful
1answer

Ignition key wont turn off position

press the brake when removing the key.
12/22/2013 3:54:15 AM • Chevrolet... • Answered on Dec 22, 2013
0helpful
1answer

Procedure use reset car s computer

Does the ac unit fans come on? Also if it does come on is it only on bottom floor vents, or defroster only.
12/21/2013 8:22:36 PM • Chevrolet... • Answered on Dec 21, 2013
0helpful
2answers

Ac compressor wont go on

ac compresor relay diagram/scamatic
12/12/2013 8:54:33 PM • Chevrolet... • Answered on Dec 12, 2013
0helpful
1answer

Hard starting cold

Is cranking speed slow? Do a voltage drop test on battery cables.and a high output amp meter to test starter draw. normal ampere draw should be 250-350 amps cold and 300-375 amps hot as engine turns these readings should drop to 200-250 amps if not bad starter.
11/5/2013 11:31:05 PM • Chevrolet... • Answered on Nov 05, 2013
0helpful
1answer

Charging system

the charging system consists of the battery and the cables , ,alternator and its wiring. the battery must be good charged and clean connections. the alternator should output 13.5 to 15 volts. the heavy lead from the alternator should be connected to pos cable on battery
11/3/2013 9:15:58 PM • Chevrolet... • Answered on Nov 03, 2013
0helpful
1answer

Installing new seats in a 2008 corvet need

raise power seat to max height. remove the covers on floor bolts and remove seatbelt anchors. disconnect wiring under seat
11/3/2013 8:42:07 PM • Chevrolet... • Answered on Nov 03, 2013
0answers
0helpful
1answer

Engine revving while stopped

On all older vehicles with a carburetor there is an adjustment for high and low idle. Adjust the high idle so that it isn't so high
10/16/2013 4:19:19 AM • Chevrolet... • Answered on Oct 16, 2013
0helpful
2answers

Gas gauge stopped working

The coil on the gauge is bad. Need to replace the gauge.
10/15/2013 3:04:04 PM • Chevrolet... • Answered on Oct 15, 2013
0helpful
1answer

Charging system CHARGING

Sounds like the alternator belt might be slipping and needs to be tighten.
10/6/2013 8:27:59 PM • Chevrolet... • Answered on Oct 06, 2013
0answers

Replace choke

Be the first to answer 9/23/2013 5:54:49 AM • Chevrolet... • Posted on Sep 23, 2013Be the first to answer
0helpful
1answer

Oil running out the back of intake leaking at the

check for a misplaced rocker cover gasket. Check that it has not squeezed out on in and that all the bolts went through the holes in the gasket
9/15/2013 3:52:07 AM • Chevrolet... • Answered on Sep 15, 2013
0helpful
1answer

I recently got a 89 vette and the guy had changed

IF the ignition system was changed I would go back to basics and checking ignition timing. Check advance in the distributor is working as the removed unit probably had an inbuilt circuit that altered the timing to suit the rpm's
9/14/2013 4:07:21 AM • Chevrolet... • Answered on Sep 14, 2013
Not finding what you are looking for?
1977 Chevrolet Corvette Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Corvette Chevrolet

  • Corvette Chevrolet

Most Popular Question

fuse interior lights 77 corvette

  • Cars & Trucks
Loading...