20 Most Recent
1998 BMW 318i Questions & Answers
Extractor tank keep busting
Epoxy is a great tool, but rarely works on the cooling system (I assume you mean the over flow tank. your best bet is to replace the part The chemical makeup of Coolant, combined with heat and pressure makes the plastic around the epoxy very brittle and tends to continue to cause cracks and eventually will just crumble. There are "plastic welders" on the market that I have had some success with in the past, but alot of times it becomes a band aid. Depending on the year and make of the car you may be able to get a used part from a junk yard or online market
Fuel not getting into combustion chamber
have a fuel pressure test done on the fuel manifold to check for faulty pump/filter and pressure regulator. run fault codes and look for cam/crank position sensor and /or faulty injectors.
What cause my steering to move when I step on the
It's called "bump steer,"
and it means your steering linkage is not mounted parallel in
the chassis possibly as a result of collision or frame damage,
a bent steering arm, misalignment in the chassis, or an improperly
mounted steering rack.Could also mean your brakes need to be replaced.
My bmw 318i air con fanbelt broke how urgent is this
Are you sure that the belt only turns the AC compressor? Be sure that it's not also connected to the fan and the power steering pump. If it's only turning the air conditioning compressor then you can live with it for as long as you can live without air conditioning.
Not finding what you are looking for?